We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three black SATA cables with 90-degree right-angle locking connectors, 18 inch length

YOUHUA

YOUHUA SATA III cable 3-pack 6 Gbps 90° right-angle locking 18 inch

SKU CH-590S-4PN36

Three 18-inch right-angle SATA III cables with locking latches connect drives at up to 6 Gbps

  • FeaturesSATA III cable is designed to connect motherboards and host
  • Up to 6 Gbps transfer with SATA 3.0 revision
  • 90-degree right-angle connectors simplify tight-case routing
  • Locking latch on each end secures the link
  • Three-cable pack covers RAID arrays or spare drives
  • Compatible with 2.5-inch SSD, 3.5-inch HDD and optical drives

Three-pack SATA III cables for storage upgrades

This three-pack of SATA III cables connects motherboards and host controllers to internal Serial ATA hard drives, SSDs and optical drives. Each cable measures 18 inches and supports the 6 Gbps Revision 3.0 standard while remaining backward compatible with earlier SATA versions. The right-angle connectors and locking latches keep connections secure inside the case.

Builders adding multiple drives or configuring RAID

The pack suits anyone fitting several 2.5 or 3.5 inch drives, optical drives or a RAID controller host card where spare cables are useful. The low-profile jacket and 90 degree ends help routing in tighter chassis. Buyers who need powered eSATA connections or longer runs for external enclosures should look at something else.

Locking latches and right-angle plugs for reliable

Stainless-steel locking clips on both ends prevent accidental disconnection during drive swaps or case moves. The 90 degree orientation reduces strain on motherboard ports and eases cable management behind drive cages. No software or drivers are required; the cables are plug-and-play data links only.

Highlights

  • Up to 6 Gbps transfer with SATA 3.0 revision
  • 90-degree right-angle connectors simplify tight-case routing
  • Locking latch on each end secures the link
  • Three-cable pack covers RAID arrays or spare drives
  • Compatible with 2.5-inch SSD, 3.5-inch HDD and optical drives

Specifications

FeaturesSATA III cable is designed to connect motherboards and host controllers to internal Serial ATA hard drives and DVD drives, quickly upgrading your computer for expanded storage. Please be kindly noted that this cable does not provide power for your hard drive. It must be powered separately.

Questions about this item

Does the 90° right-angle connector need a special motherboard header?

No, it plugs into any standard 7-pin SATA port on the motherboard or host controller.

Will the 6 Gbps cable slow down my older SATA II hard drive?

The cable is backwards compatible with SATA I and II, so the drive runs at its own rated speed.

How can I verify the 3.0 revision is active after connecting an SSD?

Check the negotiated link speed in BIOS or OS disk utilities; it should show 6 Gbps when the drive supports it.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.