We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black plastic 12V 2A power adapter with bare wires and quick connector

YOOFONE YF-1202 12V 2A 24W Power Adapter Bare Wire Quick Connector

SKU CH-09AN-HTWEH

Converts 100-240 V AC to 12 V DC at up to 2 A with bare-wire output and a solder-free quick connector for LED strips

  • Type12 V
  • ColorBlack
  • Specifications24 watts, 12 volts, 2 amps, 120 volts, Barrel Connector, 50-
  • Connector ABarrel Connector
  • Connector BBarrel Connector
  • Cable Jakcet TypePlastic
  • Solder-free wiring with bare-wire quick connector
  • Red-positive black-negative colour coding prevents reverse polarity
  • Universal 100-240 V AC input suits global mains
  • Built-in overload over-voltage over-current over-temperature short-circuit protection
  • Powers 12 V LED strips and devices up to 24 W

12 V 2 A bare-wire adapter

The YOOFONE YF-1202 converts 100-240 V AC at 50-60 Hz into 12 V DC at up to 2 A, delivering 24 W through a barrel connector and bare wires with a solder-free quick terminal. Red and black leads mark positive and negative polarity so connections stay correct.

Installers wiring LED strip lighting

Suits technicians who need a compact supply with built-in overload, over-voltage, over-current, over-temperature and short-circuit protection. Not for devices that draw more than 2 A or require a waterproof connector, since the quick terminal is not sealed.

Handles 1.1 A to 2 A loads with 24 W headroom

Comfortably powers 12 V strips, cameras or routers rated up to 2 A. Runs out when the load exceeds 2 A or 24 W, and the quick connector must stay in dry environments between 0 and 40 °C operating temperature.

Highlights

  • Solder-free wiring with bare-wire quick connector
  • Red-positive black-negative colour coding prevents reverse polarity
  • Universal 100-240 V AC input suits global mains
  • Built-in overload over-voltage over-current over-temperature short-circuit protection
  • Powers 12 V LED strips and devices up to 24 W

Specifications

BrandYOOFONE
SeriesYF-1202
ModelYF-1202
Type12 V
ColorBlack
Specifications24 watts, 12 volts, 2 amps, 120 volts, Barrel Connector, 50-60Hz, type_a_2pin_na, LED Strip, YF-1202
Connector ABarrel Connector
Connector BBarrel Connector
Cable Jakcet TypePlastic
Connector StyleBarrel Connector
Apple CompatibleBarrel Connector
FeaturesLED Strip, Barrel Connector, Corded Electric, DC, 24 watts
Dimensions4.9022 cm x 6.604 cm x 9.8044 cm
Weight0.1 pounds
Package Quantity100
Package Contents100
Disclaimer6 months, not_applicable

Questions about this item

What voltage and current must my LED strip or device require to work with this 12V 2A adapter?

Your device must operate on 12V DC and draw no more than 2A (2000mA) or 24W total. The adapter supports loads such as 1.1A, 1.2A, 1.4A, 1.5A, 1.8A or 2A.

Can I use this adapter with an existing barrel-connector LED strip without cutting the plug off?

This unit supplies bare red and black wires with a solder-free quick connector. You must insert the strip's wires into the connector; a barrel plug cannot be used directly.

How can I verify the adapter is working correctly after wiring it up?

The LED strip should illuminate steadily at full brightness. Built-in overload, over-voltage, over-current, over-temperature and short-circuit protections will shut the output down if a fault occurs.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.