Peerless Industrial Group
Peerless Industrial Group Tire Chains Single Bus & RV V-Bar PK2 QG2821
$67.99
0.00082009BTC
In stock
YOJOCK USB C Tester Power Meter 4-30V 0-6.5A 195W Classic Version
Measures USB-C voltage up to 30 V, current up to 6.5 A and power up to 195 W, supports QC 2.0, 3.0, 4.0 and Super VOOC protocols, and stores capacity and energy data when power is removed
- FeaturesUSB C Tester, 3c, Usb, false
- Sports Team1 Piece
- Measures voltage from 4 V to 30 V for USB-C power analysis
- Tracks current up to 6.5 A to verify charger output
- Calculates power up to 195 W for fast-charge validation
- Stores capacity and energy data after power loss for later review
- Supports QC 2.0, 3.0, 4.0 and Super VOOC protocols for broad compatibility
USB C Power Meter 4-30V 0-6.5A
This USB C tester measures voltage, current, power, capacity, energy, temperature, resistance and charging time on Type-C devices. It operates from 4 to 30 volts and handles up to 6.5 amps for a maximum of 195 watts. The unit stores capacity and energy data when power is lost so you can review results later. It is aimed at digital enthusiasts and anyone checking charger or cable performance.
Replaces basic single-readout meters
A simple voltmeter only shows one value at a time and loses data when unplugged. This tester cycles through multiple screens with one button press and rotates the display with a double-click. The jump is worth it when you need to log full charge cycles, verify fast-charge protocols such as QC 2.0, 3.0, 4.0 or Super VOOC, or compare capacity across power banks without manual notes.
Check your charger and cable ends before ordering
The screen lights automatically with a USB-A source but requires a load connected on a PD source to power up. You need a Type-C charger and a Type-C device or load to use all functions. Calibration also demands a connected load when powered from a PD charger. If your setup uses only legacy USB-A ports, the tester will still work but protocol detection is limited to what the source supports.
Highlights
- Measures voltage from 4 V to 30 V for USB-C power analysis
- Tracks current up to 6.5 A to verify charger output
- Calculates power up to 195 W for fast-charge validation
- Stores capacity and energy data after power loss for later review
- Supports QC 2.0, 3.0, 4.0 and Super VOOC protocols for broad compatibility
Specifications
| Brand | YOJOCK |
|---|---|
| Features | USB C Tester, 3c, Usb, false |
| Sports Team | 1 Piece |
Questions about this item
What connectors does the USB C Tester need on the charger and device to fit?
It fits between a USB-C charger port and a USB-C device port, measuring voltage from 4 to 30V and current up to 6.5A.
How do I install the tester and what step is often missed?
Plug the tester into the charger, then connect your device; the screen only lights up when both ends are connected, which many users forget.
What maintenance will the USB C Tester need later?
Hold the button for three seconds to clear stored capacity, energy and time data; recalibrate by holding the button while applying power per the manual.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
