We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular black box with terminal connectors on front

Valcom, Inc

Valcom, Inc V-1095 70 Volt Expander

SKU CH-Q29R-ZVZ0M

Expands 25/70/100 volt audio systems without overloading the amplifier, connects directly to the line, and supports endless speaker expansion in a compact 4.44H x 2.75W x 2.88D unit weighing 1.1 lbs

  • Expands 25/70/100 Volt systems without overloading the amplifier
  • Connects directly to amplifier output or anywhere on the 25/70/100 Volt line
  • Adds speakers and horns without costly amplifiers or heavy-gauge cable
  • Lightweight 1.1 lb unit fits tight spaces at 4.44H x 2.75W x 2.88D inches
  • 8 ohm output impedance matches Valcom speakers for reliable performance

Valcom V-1095 70 Volt Expander

The Valcom V-1095 70 Volt Expander expands a 25/70/100 Volt paging system without straining the existing amplifier. It connects to the amplifier output or anywhere on the 25/70/100 Volt line. No costly amplifiers or heavy gauge cable are required. Endless expansion is possible using Valcom speakers and horns.

Suited for paging installers needing wider coverage

This unit suits installers who must extend coverage across large facilities using the existing constant-voltage line. It is not intended for low-impedance speaker runs or for systems that require digital signal processing. Buyers who need integrated mixing or zone control should look at dedicated paging amplifiers instead.

Simple two-wire connection to the 25/70/100 Volt

Installation is a simple two-wire connection to the 25/70/100 Volt line with an 8 ohm output for Valcom speakers and horns. The compact enclosure measures 4.44H x 2.75W x 2.88D and weighs 1.1 lbs. A common error is exceeding the amplifier's total load rating when adding multiple expanders.

Highlights

  • Expands 25/70/100 Volt systems without overloading the amplifier
  • Connects directly to amplifier output or anywhere on the 25/70/100 Volt line
  • Adds speakers and horns without costly amplifiers or heavy-gauge cable
  • Lightweight 1.1 lb unit fits tight spaces at 4.44H x 2.75W x 2.88D inches
  • 8 ohm output impedance matches Valcom speakers for reliable performance

Specifications

BrandVALCOM

Questions about this item

Does the V-1095 expander require a separate amplifier to connect to my 70 volt paging line?

No, the unit connects directly to the amplifier output or anywhere on the 25/70/100 volt line without needing an additional amplifier.

Can I use my existing Valcom speakers and horns with this 70 volt expander?

Yes, the V-1095 is designed for endless expansion using Valcom speakers and horns on the same 25/70/100 volt system.

What speaker impedance should I measure at the V-1095 output to confirm it is wired correctly?

The expander presents an 8 ohm output impedance for the connected speaker load.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.