We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black sleeved cables with ATX 8-pin and PCIe 6+2 connectors

YEZriler 8 Pin PCIe Cable for Corsair PSUs 2-Pack 25-inch

SKU CH-2J2F-T9VSH

Two 25-inch cables convert an ATX 8-pin PSU connector to a PCIe 6+2-pin plug for compatible Corsair and other power supplies

  • TypeExtension Cable
  • ColorBlack
  • Length< 1"
  • Cable Length32.8 ft.
  • SpecificationsVGA, Single 8 pin (6+2), YEZriler
  • Sports Team2 Piece
  • Adds two PCIe power connectors to a Corsair PSU with ATX 8-pin to 6+2-pin cables
  • 25-inch sleeved cables route cleanly in mid-tower and compact builds
  • 18 AWG tin-coated copper handles GPU loads up to 150 W per connector
  • Compatible with RM, RMX, HX, AX, SF, TX and CX Corsair series plus listed Greatwall, Cougar, Antec and Thermaltake units
  • 2-pack includes hook-and-loop strip for tidy cable management

8 Pin PCIe Cable for Corsair PSUs

This two-pack supplies ATX 8-pin male to PCIe 8-pin (6+2) male cables for graphics cards. Each cable measures 25 inches (63 cm) and uses 1007-18AWG tin-coated copper wire. The set includes a hook-and-loop strip for tidy routing inside the case.

Sleeved connectors and fixed pinout

The ATX 8-pin male end plugs only into compatible Corsair and listed third-party power supplies; it cannot be swapped with the PCIe end. The PCIe 8-pin (6+2) male end fits both 6-pin and 8-pin graphics-card sockets from brands such as ASUS, ASRock, Gigabyte and Radeon. Sleeving protects the wires and eases cable management.

Not for motherboard power or AX1200 units

These cables are designed solely for graphics cards and will not work with motherboard EPS connectors. They are incompatible with the Corsair AX1200 power supply. Builders needing CPU power cables or AX1200 compatibility must choose a different product.

Highlights

  • Adds two PCIe power connectors to a Corsair PSU with ATX 8-pin to 6+2-pin cables
  • 25-inch sleeved cables route cleanly in mid-tower and compact builds
  • 18 AWG tin-coated copper handles GPU loads up to 150 W per connector
  • Compatible with RM, RMX, HX, AX, SF, TX and CX Corsair series plus listed Greatwall, Cougar, Antec and Thermaltake units
  • 2-pack includes hook-and-loop strip for tidy cable management

Specifications

BrandApple
TypeExtension Cable
ColorBlack
Length< 1"
Cable Length32.8 ft.
SpecificationsVGA, Single 8 pin (6+2), YEZriler
Sports Team2 Piece
Connector DetailVGA to VGA
Terminal GenderMale to Female
Refresh Rate25 inches
FeaturesVGA, Single 8 pin (6+2), YEZriler
DisclaimerRoHS

Questions about this item

What does the ATX 8-pin male to PCIe 8-pin (6+2) male interface cap in practice?

The cable connects a Corsair PSU ATX 8-pin port to a graphics card PCIe 8-pin (6+2) port and carries 12 V power up to the PSU-rated limit.

What physical clearance does the 25-inch sleeved cable need inside the case?

The 63 cm length including connectors requires space for routing from the PSU to the GPU plus room for the included hook loop strip.

How is the cable installed and which step is often missed?

Plug the ATX 8-pin male end into the PSU, attach the PCIe 6+2 end to the graphics card, secure with the hook loop strip, and verify the 2-pin section is seated for 8-pin cards.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.