We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black flat PCIe cable with dual 6+2-pin GPU connectors and pigtail, 0.60 m long

YEPLOOK

YEPLOOK PCIe Dual 8Pin 6+2Pin Pigtail GPU Cable Corsair HX-i Type 3 0.60m

SKU CH-7TYM-TBGMM

Dual 6+2-pin PCIe GPU power cable with pigtail for Corsair HX-i Type 3 PSUs, 0.60 m long, 18 AWG UL1007 wire

  • ColorBlack
  • Cable Length1.96 ft. (0.60m)
  • UL1007 18AWG wire resists heat up to 80°C for reliable GPU power
  • Flat flexible design eases routing and cuts clutter inside the case
  • 6+2 pin connectors slide to fit 6-pin or 8-pin graphics cards
  • Pigtail layout powers two GPU connectors from one PSU 8-pin port
  • Built for Corsair HX-i Type 3 units including HX1200i, HX1000i, HX850i, HX750i

PCIe GPU Cable for Corsair HX-i Type 3 PSUs

This internal power cable connects Corsair HX1200i, HX1000i, HX850i and HX750i Type 3 modular power supplies to a graphics card. It is intended for builders and technicians who need a direct replacement or an additional GPU power lead for those specific units. The 0.60 m length suits compact routing inside standard chassis. It is not for owners of Corsair Type 1, Type 2 or Type 5 power supplies, nor for any other brand of modular PSU.

18AWG UL1007 wire with flexible flat layout

The cable uses 18AWG tin-plated copper conductors rated to 300 V and an operating range of -30 °C to 80 °C. A flat profile makes bending and cable management straightforward, reducing clutter behind the motherboard tray. One PSU-side 8-pin plug feeds two PCIe 6+2-pin connectors in a pigtail arrangement, with 34 inner wires in total. An unused pin on the PSU connector is a normal design feature, not a defect.

Dual 6+2-pin pigtail for single-cable GPU power

The splitter delivers two 6+2-pin PCIe ends from one PSU port, allowing a graphics card with dual 8-pin or 6-pin sockets to be powered without a second cable run. The 2-pin sections slide on or off to match 6-pin or 8-pin requirements. Compatibility is limited to the listed Corsair HX-i Type 3 models; using it with other units can cause damage.

Highlights

  • UL1007 18AWG wire resists heat up to 80°C for reliable GPU power
  • Flat flexible design eases routing and cuts clutter inside the case
  • 6+2 pin connectors slide to fit 6-pin or 8-pin graphics cards
  • Pigtail layout powers two GPU connectors from one PSU 8-pin port
  • Built for Corsair HX-i Type 3 units including HX1200i, HX1000i, HX850i, HX750i

Specifications

BrandYEPLOOK
ColorBlack
Cable Length1.96 ft. (0.60m)

Questions about this item

What PSU-side connector does this cable use, and which Corsair HX-i models is it built for?

It plugs into an 8-pin Type 3 modular port and is made for the HX750i, HX850i, HX1000i and HX1200i power supplies.

How long is the cable, and will its 18AWG flat profile fit behind a motherboard tray?

Total length is 0.60 m with a 20 cm pigtail; the flat 18AWG construction bends easily in tight routing channels.

How do I attach the 6+2 pin to my graphics card, and what mistake should I avoid?

Slide the 2-pin segment onto the 6-pin base for an 8-pin GPU or leave it off for a 6-pin card; do not mix this Type 3 cable with Corsair Type 1, 2 or 5 units.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.