YEPLOOK
YEPLOOK PCIe Dual 8-Pin 6+2Pin Sleeved 60+20CM GPU Power Cable for Corsair AX-i Series
A sleeved 18 AWG GPU power cable with a PSU 8-pin connector splitting to two PCIe 6+2-pin plugs, 60 cm plus 20 cm long, for Corsair AX-i modular supplies
- Typemodular power cable
- ColorBlack
- Connector A2x PCIe 6+2pin male
- Connector BPSU 8Pin
- Connector Number3
- Connector DetailPCIe 8pin
- Tinned copper resists corrosion for longer cable life
- Flat braided nylon sleeve enables tight folds and neat routing
- Dual 6+2 pin PCIe connectors fit 6-pin, 8-pin or 6+8-pin GPU sockets
- 60 cm main plus 20 cm branch reaches distant graphics cards cleanly
- 18 AWG UL1007 wires rated 300 V from -30 °C to 80 °C
Corsair AX-i dedicated GPU cable
This sleeved assembly connects a Corsair AX-i series modular power supply to a graphics card using one PSU-side 8-pin and two PCIe 6+2-pin connectors. The flat nylon-braided construction uses 18 AWG tinned copper conductors rated for 300 V and an operating range of -30 °C to 80 °C. It is a new replacement part designed exclusively for AX1600i, AX1500i, AX1200i, AX860i and AX760i units.
Builders with AX-i PSUs needing dual GPU plugs
The cable suits anyone upgrading or re-routing power on the listed Corsair models where the pin layout matches the empty-pin PSU connector shown in the documentation. It will not work with power supplies from other brands or non-AX-i Corsair lines, and mixing it with unrelated modular cables can cause damage. Buyers who need a different PSU-side pinout or a single PCIe connector should look elsewhere.
60 cm plus 20 cm split length decides routing
The total run measures 60 cm from the PSU to the first branch point, then 20 cm to each PCIe plug, giving a fixed geometry for cable management. Thirty-four internal wires inside the UL1007 sheath carry the load, and the 6+2-pin ends slide to fit 6-pin, 8-pin or 6+8-pin card sockets. If your case layout demands a different overall reach or branch spacing, this cable will not match.
Highlights
- Tinned copper resists corrosion for longer cable life
- Flat braided nylon sleeve enables tight folds and neat routing
- Dual 6+2 pin PCIe connectors fit 6-pin, 8-pin or 6+8-pin GPU sockets
- 60 cm main plus 20 cm branch reaches distant graphics cards cleanly
- 18 AWG UL1007 wires rated 300 V from -30 °C to 80 °C
Specifications
| Brand | YEPLOOK |
|---|---|
| Type | modular power cable |
| Color | Black |
| Connector A | 2x PCIe 6+2pin male |
| Connector B | PSU 8Pin |
| Connector Number | 3 |
| Connector Detail | PCIe 8pin |
| Terminal Gender | Male to Male |
Questions about this item
Is the 60 cm + 20 cm dual-head length suitable for a full-tower build with the GPU mounted vertically?
The cable provides a 60 cm main run plus a 20 cm branch to the second PCIe 6+2 pin, giving enough reach for most full-tower layouts including vertical GPU mounts.
What does the 800 W headline figure mean once the cable is installed in a real system?
The 18 AWG tinned copper conductors are rated for up to 800 W total across both PCIe 6+2 pin plugs, covering cards such as the GeForce 3080 or 6800 XT.
The PSU end uses an 8-pin connector — what standard does it follow and what does that cap in practice?
The PSU-side 8-pin follows the Corsair AX-i series pinout; the empty pin is by design. It caps use to AX1600i, AX1500i, AX1200i, AX860i and AX760i units only.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115247BTC
In stock
