YEPLOOK
YEPLOOK PCIe 8Pin to 6+2Pin GPU Power Cable for Corsair CX-M Type 3 18AWG 60cm
Connects Corsair CX-M Type 3 PSUs to graphics cards via an 8-pin to 6+2-pin PCIe cable with 18AWG tinned copper conductors
- ColorBlack
- Cable Length1.96 ft. (0.60m)
- Tinned copper adds protection and extends cable life
- Flat design enables tight folds for clean cable management
- 6+2 pin connector fits 6, 8 or 6+8 pin GPU sockets
- Supports graphics cards drawing up to 800W
- 60cm length suits standard case routing
Compatible Corsair CX-M Power Supplies
This 60 cm cable connects a Corsair CX-M Type 3 modular PSU to a graphics card. It fits CX430M, CX450M, CX500M, CX550M, CX600M, CX650M, CX750M and CX850M units. The PSU-end plug is an 8-pin header with one empty position, which is the standard pin layout for this series. Mixing cables from other brands or models may cause damage.
Builders Using Corsair CX-M Type 3 Units
The flat 18AWG tinned-copper construction makes routing easier in tight cases. It serves GPUs with 6-pin, 8-pin or dual 6+8-pin sockets. Buyers with non-Corsair modular supplies or Corsair series other than CX-M Type 3 cannot use this cable. Builders who need longer reach or multiple PCIe connectors from one PSU port should look elsewhere.
Single 60 cm 18AWG Cable with 8-Pin to 6+2-Pin Ends
The assembly uses 34 strands of tinned copper rated for 300 V and an operating range of -30 °C to 80 °C. One end plugs into the PSU 8-pin port; the other splits into a 6+2-pin PCIe connector that mates with 6-pin or 8-pin GPU sockets. The package contains only this one cable.
Highlights
- Tinned copper adds protection and extends cable life
- Flat design enables tight folds for clean cable management
- 6+2 pin connector fits 6, 8 or 6+8 pin GPU sockets
- Supports graphics cards drawing up to 800W
- 60cm length suits standard case routing
Specifications
| Brand | YEPLOOK |
|---|---|
| Color | Black |
| Cable Length | 1.96 ft. (0.60m) |
Questions about this item
What does the PSU 8-pin to PCIe 6+2-pin interface support?
This cable connects a Corsair CX-M Type 3 modular PSU to graphics cards needing 6-pin, 8-pin, or 6+8-pin power, rated for up to 800 W with 18 AWG tinned copper conductors.
What clearance does the 60 cm flat cable need for routing?
The 600 mm flat ribbon design bends tightly for compact cases; the PSU plug uses a standard Type 3 8-pin header with one empty pin position that matches the original cable layout.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



