We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black flat ribbon cable with 6-pin plug splitting to four straight SATA connectors

YEPLOOK

YEPLOOK 6Pin to 4x SATA Straight Internal Power Cable

SKU CH-C78B-02RM7

Connects up to four SATA drives to a Corsair Type 3 or Type 4 modular PSU with flat 18AWG ribbon cable

  • ColorBlack
  • Connects four SATA drives from one modular 6-pin output
  • Flat ribbon design keeps cable routing tidy inside the case
  • 18 AWG tinned copper resists corrosion for lasting reliability
  • Flexible construction bends easily around tight chassis corners
  • 50 cm lead plus three 15 cm branches suit varied drive layouts

Compatible Corsair PSU Wiring

This internal power cable connects a single 6-pin modular port on compatible Corsair Type 3 and Type 4 power supplies to four SATA devices. It supports SSD, HDD and riser card installations across a wide range of Corsair AX-i, HX-i, HX, TX-M, CS-M, CX-M, RM, RM-i, RM-x, RM-e and SF series units from 450W to 1500W.

Daisy-Chain Length and Current Limits

The flat ribbon cable uses 18AWG tinned copper wire and measures 50 cm from the PSU to the first connector, with 15 cm gaps between the four SATA plugs. The 6-pin side carries only five active wires, leaving one hole empty by design. Total current draw across all four drives must stay within the 6-pin connector and 18AWG wire rating.

Check Modular Port Type and Clearance

Verify that your Corsair PSU uses Type 3 or Type 4 modular sockets before ordering; other pinouts will not match. Ensure the 50 cm lead reaches your drive cage and that the straight SATA plugs fit your device orientation without blocking adjacent ports.

Highlights

  • Connects four SATA drives from one modular 6-pin output
  • Flat ribbon design keeps cable routing tidy inside the case
  • 18 AWG tinned copper resists corrosion for lasting reliability
  • Flexible construction bends easily around tight chassis corners
  • 50 cm lead plus three 15 cm branches suit varied drive layouts

Specifications

ColorBlack

Questions about this item

Should I choose a longer or shorter cable for my build?

This cable provides a 50 cm lead to the first SATA connector and three 15 cm gaps between the remaining four connectors, giving enough reach for most chassis layouts without excess slack.

How many drives can I power from one 6-pin modular port?

The single 6-pin plug splits into four SATA power connectors, so you can run up to four SSDs, HDDs or SATA-powered riser cards from one modular PSU socket.

Does the 6-pin Type 3 or Type 4 connector limit the power available to each SATA device?

The cable uses 18 AWG tinned copper wire rated for standard SATA power delivery, and the 6-pin Type 3/4 modular interface on compatible Corsair PSUs supplies sufficient current for four typical drives.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.