YEPLOOK
YEPLOOK 6Pin to 4x Molex IDE 4Pin Straight PATA Power Cable Corsair TX850M TX750M TX650M TX550M Type 3
Connects a Corsair Type 3 modular PSU to four Molex PATA drives with a 50 cm lead and 15 cm branches
- ColorBlack
- Connect up to four legacy drives using one modular port
- 6-pin Type 3 plug fits Corsair TX850M TX750M TX650M TX550M
- 50 cm lead plus three 15 cm drops for flexible routing
- Straight Molex connectors suit IDE hard drives and optical drives
- Each cable inspected and tested before shipment
Target hardware
This YEPLOOK cable connects Corsair TX-M Type 3 modular power supplies to four Molex IDE 4-pin peripherals. It fits TX850M, TX750M, TX650M and TX550M units. Builders adding legacy hard drives, optical drives or fan controllers to these specific PSUs will find the correct pinout in one assembly.
Upgrade scope
The cable replaces a missing or damaged Type 3 peripheral lead, letting you run up to four PATA devices from a single 6-pin modular port. The jump is worth it when your TX-M unit lacks enough Molex headers for older drives or cooling gear. It does not serve AX1200 Gold, Type 2 AX Gold, Type 5 or non-Corsair modular supplies.
Compatibility check
Verify your power supply is a Corsair TX-M series labelled Type 3 before ordering. Confirm the modular port on the PSU side is a 6-pin socket matching the cable's connector. Note the cable includes two empty pins on that 6-pin plug, which is the standard pinout for this series. Mixed-brand cables can cause damage, so do not combine this lead with wires from other PSU models or manufacturers.
Highlights
- Connect up to four legacy drives using one modular port
- 6-pin Type 3 plug fits Corsair TX850M TX750M TX650M TX550M
- 50 cm lead plus three 15 cm drops for flexible routing
- Straight Molex connectors suit IDE hard drives and optical drives
- Each cable inspected and tested before shipment
Specifications
| Color | Black |
|---|
Questions about this item
Does the 6-pin end plug into Corsair TX850M, TX750M, TX650M or TX550M Type 3 modular PSUs?
Yes, the 6-pin connector is pinned for Corsair Type 3 modular supplies including TX850M, TX750M, TX650M and TX550M.
What is the common mistake when routing the 50 cm lead to the first Molex and the three 15 cm daisy-chain drops?
Builders often pull the 50 cm section tight before seating all four Molex plugs, which stresses the crimps; leave slack at each 15 cm branch.
The cable has two empty pins on the 6-pin side — does that mean it will need replacement?
No, the two empty positions are the standard Type 3 pinout and the cable is tested before shipment; it only needs replacement if a Molex connector physically breaks.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



