YEPLOOK
YEPLOOK 6Pin to 3x Molex IDE 4Pin Angled PATA Perif Power Cable Corsair Type 3 & 4 Modular
Adapts a Corsair Type 3 or Type 4 modular PSU to three Molex IDE peripherals via an angled 6-pin connector
- ColorBlack
- Powers legacy IDE and Molex drives from a single Corsair modular port
- Angled 6-pin connector eases routing in tight chassis spaces
- Supplies three 4-pin Molex connectors for multiple peripheral devices
- Compatible with Corsair Type 3 and Type 4 modular PSU series
- Tested by technical team before shipment for reliable operation
PATA Perif Cable for Corsair Type 3 & 4
This YEPLOOK cable converts a single 6-pin modular port into three angled Molex IDE 4-pin connectors. It is built for Corsair Type 3 and Type 4 modular power supplies including the AXi, HXi, RMi, RMx, HX, RM, CSM, CXM, TXM and SF series. The black angled design helps route power to legacy PATA drives or peripherals in tight spaces. Condition is new.
Suits builders adding IDE drives to compatible
The cable fits the listed Corsair Type 3 models such as AX1500i, HX1200i, RM1000 and CX750M, plus Type 4 units like AX1600i and AX1000 Titanium. It is not for power supplies that lack a 6-pin peripheral port or use a different modular pin-out. Mixing cables from other brands may cause damage, so verify the exact PSU model before purchase.
Single 6-pin to three Molex 4-pin split
One 6-pin connector on the PSU side feeds three Molex IDE 4-pin plugs on the device side. The missing pins on the 6-pin header are the default pin layout, not a defect. Each cable is tested by the technical team before shipment. This specification decides whether the cable matches the modular port and the number of legacy drives you need to power.
Highlights
- Powers legacy IDE and Molex drives from a single Corsair modular port
- Angled 6-pin connector eases routing in tight chassis spaces
- Supplies three 4-pin Molex connectors for multiple peripheral devices
- Compatible with Corsair Type 3 and Type 4 modular PSU series
- Tested by technical team before shipment for reliable operation
Specifications
| Color | Black |
|---|
Questions about this item
Which Corsair modular PSU series must I already own for the 6-pin Type 3/4 connector to fit?
The cable plugs into the peripheral port of Corsair Type 3 or Type 4 modular units such as the RMx, RMi, HX, HXi, AXi, SF, CX-M, CS-M or TX-M series.
Can I keep my older IDE hard drives and optical drives when adding this cable to a compatible Corsair PSU?
Yes, the three angled Molex 4-pin connectors supply 5 V and 12 V to legacy PATA drives and peripherals from the same modular port.
How do I verify the cable is delivering power correctly after routing it to my drives?
Spin-up sounds and BIOS detection of each connected IDE device confirm the 6-pin to 3× Molex cable is functioning.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
