We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 6-pin male to three angled 4-pin Molex connectors, 50 cm lead with two 15 cm branches

YEPLOOK

YEPLOOK 6Pin to 3x Molex IDE 4Pin Angled internal power cable

SKU CH-X008-E2JSY

Connects a Corsair CX modular PSU to three Molex peripherals using 18 AWG wire with angled plugs

  • ColorBlack
  • Connect legacy drives using one modular port
  • 18 AWG tin-coated copper resists heat and aging
  • Angled 6-pin plug eases routing in tight cases
  • 50 cm main lead plus two 15 cm branches
  • Tested for Corsair CX 750, 650, 600, 550, 500, 450, 430 modular PSUs

6Pin to Triple Molex Adapter Cable

This YEPLOOK cable converts a single 6Pin modular output into three Molex IDE 4Pin connectors. It is built for owners of Corsair CX series modular power units who need extra peripheral power for drives or fans. The 18AWG tin-coated copper wire meets UL1007 standards for heat resistance and durability.

Suits CX Modular PSU Builders

It fits CX750, CX650, CX600, CX550, CX500, CX450 and CX430 modular power supplies only. The angled 6Pin plug has two empty pin positions by design, not defect. Builders using other brands or non-modular units should look elsewhere, as mix-use may cause damage.

50 cm Lead With Two 15 cm Branches

The main run measures 50 cm before splitting into two 15 cm tails, giving enough reach for typical case routing. Three Molex connectors share the one 6Pin source, so total draw must stay within that rail’s limit. It handles standard peripheral loads but is not a high-current splitter for multiple power-hungry devices.

Highlights

  • Connect legacy drives using one modular port
  • 18 AWG tin-coated copper resists heat and aging
  • Angled 6-pin plug eases routing in tight cases
  • 50 cm main lead plus two 15 cm branches
  • Tested for Corsair CX 750, 650, 600, 550, 500, 450, 430 modular PSUs

Specifications

ColorBlack

Questions about this item

Do I need a modular Corsair CX power supply with a free 6-pin peripheral port to use this cable?

Yes, the cable plugs into a 6-pin peripheral socket on a compatible Corsair CX modular PSU such as the CX750, CX650, CX600, CX550, CX500, CX450 or CX430.

Can I keep my older IDE hard drives and 4-pin Molex case fans when I install this cable?

The cable provides three standard 4-pin Molex connectors spaced 15 cm apart, so legacy PATA drives and fans can be powered alongside newer components.

How can I confirm the cable is seated correctly after routing it behind the motherboard tray?

Check that the 6-pin male end clicks fully into the PSU's peripheral port and that each angled 4-pin Molex connector locks onto its device; the two empty pins on the 6-pin plug are normal by design.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.