We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 6-pin to three Molex power cable, 50 cm lead with two 15 cm branches

YEPLOOK

YEPLOOK 6Pin to 3x Molex 4Pin IDE PATA Cable for Corsair RM Type 3

SKU CH-EADH-99WCC

Adapts a Corsair RM Type 3 modular PSU 6-pin port to three Molex 4-pin connectors for IDE drives or fans using 18AWG cable

  • ColorBlack
  • Connects three legacy drives using one modular port
  • 6-pin male to three Molex 4-pin female connectors
  • Compatible with Corsair RM Type 3 units from 450 W to 1000 W
  • 18 AWG tin-coated copper wire resists heat and ageing
  • 50 cm lead plus two 15 cm branches aids cable routing

Compatible Corsair RM Type 3 modular PSUs

This cable connects Corsair RM450, RM550, RM650, RM750, RM850 and RM1000 Type 3 modular power supplies to legacy peripherals. It is built for builders adding IDE hard drives, optical drives or Molex-powered fans to these specific units. It will not work with Corsair Type 1, Type 2 or Type 5 power supplies, nor with modular units from other brands.

Three Molex connectors on one 6-pin lead

The 6-pin male end plugs into the PSU peripheral port while the three Molex 4-pin female connectors share the single rail. Each connector can supply standard Molex current for a drive or fan, but the combined draw must stay within the PSU peripheral port rating. Builders needing more than three devices must use additional cables from the PSU.

18 AWG tin-coated copper with 50 cm lead

The main 50 cm lead plus two 15 cm branches use 18 AWG tin-coated copper wire rated for heat resistance and durability. The flexible jacket bends easily for clean routing behind motherboard trays. Under normal loads the cable runs cool and adds no audible noise to the system.

Highlights

  • Connects three legacy drives using one modular port
  • 6-pin male to three Molex 4-pin female connectors
  • Compatible with Corsair RM Type 3 units from 450 W to 1000 W
  • 18 AWG tin-coated copper wire resists heat and ageing
  • 50 cm lead plus two 15 cm branches aids cable routing

Specifications

ColorBlack

Questions about this item

Will the 6-pin connector on this cable fit the modular port on my Corsair RM750 Type 3 power supply?

Yes, the cable is built for Corsair RM Gold Type 3 modular units including the RM450, RM550, RM650, RM750, RM850 and RM1000 with the yellow label.

How can I confirm the cable is delivering power correctly once installed?

Connect the 6-pin end to the PSU and the three Molex 4-pin plugs to your IDE drives or fans; the devices should spin up immediately if the cable is working.

Does the package include any adapters or do I need to buy Molex devices separately?

The box contains only the 6-pin to three Molex 4-pin cable at 50 plus 15 plus 15 cm length; any IDE drives, fans or other Molex peripherals must be purchased separately.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.