We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 6-pin male to three angled Molex 4-pin female power cable, 50+15+15 cm 18AWG

YEPLOOK

YEPLOOK 6Pin to 3x Molex 4Pin Angled PATA IDE Power Cable Corsair HX750i HX850i HX1000i HX1200i

SKU CH-B1RC-PZA2B

Angled 6-pin to triple Molex cable delivers PATA power to legacy drives from compatible Corsair modular PSUs

  • ColorBlack
  • Connects Corsair Type 3 & 4 PSUs to legacy Molex devices
  • 50 cm main lead plus two 15 cm branches for flexible routing
  • 18 AWG UL1007 tinned copper wire resists heat and ageing
  • Angled 6-pin plug eases installation in tight cases
  • Powers fans, optical drives and older peripherals from one cable

What this cable does and who needs it

This YEPLOOK adapter converts a single 6-pin modular port on compatible Corsair power supplies into three Molex 4-pin connectors. It supports older peripherals such as optical drives, floppy drives and fans that still rely on Molex power. The cable is built with 18AWG UL1007 tinned copper wire for heat resistance and durability.

Check your power supply before ordering

The 6-pin end fits only Corsair Type 3 and Type 4 modular units including HX750i, HX850i, HX1000i, HX1200i, AX760i, AX860i, AX1200i and AX1500i. It will not work with Corsair Type 1 or Type 2 units, nor with any other brand. Confirm your exact PSU model before purchase to avoid damage from pinout mismatch.

Thermals noise and power in normal use

The 18AWG conductors handle typical Molex device currents without overheating. The cable adds no active components, so it produces no noise of its own. Power draw depends entirely on the connected peripherals, not on the adapter itself. Flexible sheathing makes routing easy and helps maintain airflow inside the case.

Highlights

  • Connects Corsair Type 3 & 4 PSUs to legacy Molex devices
  • 50 cm main lead plus two 15 cm branches for flexible routing
  • 18 AWG UL1007 tinned copper wire resists heat and ageing
  • Angled 6-pin plug eases installation in tight cases
  • Powers fans, optical drives and older peripherals from one cable

Specifications

ColorBlack

Questions about this item

What connectors are included on the YEPLOOK cable and do I need any extra adapters?

The cable has a 6-pin male connector for the PSU and three Molex 4-pin female connectors for drives or fans. No extra adapters are included.

Which Corsair PSU models is this 6-pin to 3x Molex cable compatible with?

It fits Corsair Type 3 and Type 4 modular units including HX750i, HX850i, HX1000i, HX1200i, AX760i, AX860i, AX1200i and AX1500i. Not for Type 1 or Type 2.

What does the 50+15+15 cm length mean when routing the cable inside a case?

The first leg is 50 cm from the PSU to the first Molex plug, then two 15 cm gaps to the second and third plugs, giving flexible reach for multiple devices.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.