We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 6-pin to three SATA power cable with 50+15+15cm 18AWG wires for Corsair Type 4 PSU

YEPLOOK

YEPLOOK 6Pin to 3 SATA internal power cable 18AWG 50+15+15CM for CORSAIR Type 4 PSU

SKU CH-6Y1Z-WXJ39

Connects three SATA drives to a Corsair Type 4 PSU with 18AWG wiring and 50+15+15cm lengths

  • ColorBlack
  • Powers three SATA drives from one PSU port using 6-pin to triple SATA layout
  • 50 cm main run plus two 15 cm branches for tidy cable routing
  • 18 AWG UL1007 wire handles heat and resists ageing for long service life
  • Straight male SATA plugs fit SSDs, HDDs and riser cards without adapters
  • Designed for Corsair Type 4 modular PSUs and backward compatible with Type 3 units

6-Pin to Triple SATA Power Cable

This 18 AWG cable splits one Type-4 6-pin output into three straight SATA power connectors for SSDs, hard drives or riser cards. The total run measures 50 cm to the first connector, then 15 cm to each of the next two. UL1007-rated wire resists heat and ageing for durable internal routing.

Check PSU Pinout Before Installing

The cable is built exclusively for Corsair Type-4 modular supplies including RM450, RM550, RM650, RM750, RM850 and RM1000 Platinum units, and is backward compatible with Type-3 AXi, HXi and HX Gold series. Different brands or series use unique pinouts; mixing them can cause damage, so verify your PSU model against the supported list before connecting.

Replaces Missing or Short Factory Leads

Use this cable when the stock Type-4 SATA leads are absent, too short or you need additional SATA ports without daisy-chaining adapters. The 18 AWG gauge matches the original supply wiring, so power delivery stays consistent. Builders who need PCIe, Molex or a different connector count cannot use this cable.

Highlights

  • Powers three SATA drives from one PSU port using 6-pin to triple SATA layout
  • 50 cm main run plus two 15 cm branches for tidy cable routing
  • 18 AWG UL1007 wire handles heat and resists ageing for long service life
  • Straight male SATA plugs fit SSDs, HDDs and riser cards without adapters
  • Designed for Corsair Type 4 modular PSUs and backward compatible with Type 3 units

Specifications

ColorBlack

Questions about this item

What comes in the box and what else do I need to power my drives?

The box contains the 6-pin to triple SATA cable only. You need a Corsair Type 4 or Type 3 modular PSU with a free 6-pin peripheral port and drives with standard SATA power inputs.

Which cable length version should I pick for a mid-tower build?

This model provides a 50 cm lead to the first SATA connector, then 15 cm to the second and another 15 cm to the third, suited for typical mid-tower drive placements.

What does the 18 AWG rating mean for my SSDs and hard drives?

The 18 AWG UL1007 wire delivers ample current for multiple SSDs or hard drives on a single cable without excessive voltage drop.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.