We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 6-pin to triple SATA power cable with 18AWG wires

YEPLOOK

YEPLOOK 6Pin to 3 SATA internal power cable 18AWG 50+15+15CM

SKU CH-6X2V-5KX8D

Connects three SATA drives to a Corsair Type 4 modular PSU with 18 AWG wiring and 50+15+15 cm lengths

  • ColorBlack
  • Connect three SATA drives from one 6-pin port
  • 18 AWG UL1007 wire resists heat and ageing
  • 50 cm lead plus two 15 cm drops aids cable routing
  • Flexible jacket simplifies internal cable management
  • Designed for Corsair Type 4 and Type 3 modular PSUs

6Pin to 3 SATA Cable for Corsair PSUs

This 18AWG internal power cable splits one 6Pin modular connector into three SATA plugs. It suits builders adding multiple SSDs, hard drives or riser cards to a Corsair Type 3 or Type 4 power supply. The 50cm lead plus two 15cm branches give enough reach for typical drive cages without excess slack. The black UL1007 jacket resists heat and stays flexible for tidy routing.

Thermals and Power Delivery

UL1007 18AWG conductors handle the current required by several SATA devices while running cool under normal loads. The straight 6Pin plug seats firmly in compatible Corsair modular ports, avoiding loose contacts that can cause voltage drop. No active cooling is needed; the cable itself remains at safe temperatures during everyday operation. The empty NC hole in the 6Pin housing matches the standard pinout and does not affect function.

Sustained Load Behaviour

Under continuous drive activity the 18AWG wires maintain stable voltage across all three SATA connectors. The cable is validated for Corsair AXi, HXi, HX, RM, RMi, RMx, RMe, CXM, CSM, TXM and SF series units from 650W to 1500W. Mixing with non-Corsair pinouts is not supported and may cause damage. Builders needing more than three SATA drops or a different modular pinout should use a dedicated cable set.

Highlights

  • Connect three SATA drives from one 6-pin port
  • 18 AWG UL1007 wire resists heat and ageing
  • 50 cm lead plus two 15 cm drops aids cable routing
  • Flexible jacket simplifies internal cable management
  • Designed for Corsair Type 4 and Type 3 modular PSUs

Specifications

ColorBlack

Questions about this item

How do I install the 6Pin to 3 SATA cable into a Corsair Type 4 modular PSU and what step do people often miss?

Plug the 6Pin connector into the PSU's peripheral port, then attach the three SATA plugs to your drives; the empty NC hole on the 6Pin housing is normal and not a defect.

What maintenance or replacement will the 18AWG UL1007 cable need over time?

The 18AWG UL1007 wire is heat resistant and not prone to aging, so no routine replacement is expected under normal use.

What limit appears first when the cable runs three SATA drives continuously?

The 18AWG conductors set the current-carrying limit, so sustained heavy loads on all three drives will hit the wire gauge rating before the connectors do.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.