We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 6-pin to three Molex 4-pin power cable, 50+15+15 cm, 18AWG

YEPLOOK

YEPLOOK 6Pin to 3 Molex 4Pin IDE PATA Fan Cable for Corsair RM 2019 Series

SKU CH-DCX2-GXYMG

A 6-pin to triple Molex 4-pin cable for Corsair RM 2019 series PSUs, 18AWG wire with 50+15+15cm length

  • ColorBlack
  • Powers three Molex devices from one modular port
  • 6-pin male plugs into Corsair RM 2019 series PSUs
  • 18AWG UL1007 tinned copper resists heat and ageing
  • 50+15+15 cm lengths give flexible routing options
  • Black sleeving keeps internal builds tidy and organised

Cable purpose and compatibility

This 6-pin to triple Molex adapter connects Corsair RM 2019 series modular power supplies to legacy peripherals such as fans, optical drives or floppy drives. It suits builders who need extra Molex connectors on RM450, RM550, RM650, RM750, RM850 or RM1000 units. Buyers with Type 1 or Type 2 Corsair PSUs, or any non-Corsair brand, cannot use this cable.

Thermals and power handling

The cable uses UL1007 18AWG tinned copper wire rated for heat resistance and long-term durability. In normal operation the conductors carry peripheral loads without excessive temperature rise. No active cooling or fan is involved, so acoustic output is zero. Power draw depends entirely on the attached devices rather than the cable itself.

Build quality and daily use

Black sleeving and flexible 18AWG construction make routing simple even in tight chassis. The 50 cm main lead splits into three 15 cm tails, giving enough reach for multiple devices while keeping clutter low. Two unused pins on the 6-pin plug are intentional and do not indicate a fault. The cable is not compatible with Corsair Type 1 or Type 2 modular PSUs, nor with other manufacturers' pinouts.

Highlights

  • Powers three Molex devices from one modular port
  • 6-pin male plugs into Corsair RM 2019 series PSUs
  • 18AWG UL1007 tinned copper resists heat and ageing
  • 50+15+15 cm lengths give flexible routing options
  • Black sleeving keeps internal builds tidy and organised

Specifications

ColorBlack

Questions about this item

How do I install the 6-pin connector into my Corsair RM 2019 PSU, and what mistake should I avoid?

Align the 6-pin male plug with the Type 3 or Type 4 modular port on the PSU and press firmly until it clicks; the two empty pin positions on the connector are normal and must not be forced.

Will the 18AWG wires or Molex connectors need replacement after long-term use?

The UL1007 tinned copper 18AWG wire is heat-resistant and designed not to age quickly, so under normal loads the cable and its three Molex 4-pin female connectors should not require replacement.

What power limit appears first when running multiple drives on the three Molex connectors continuously?

Each Molex 4-pin connector is rated for the standard peripheral current, so the combined draw of all attached drives must stay within the PSU's single 6-pin peripheral rail limit.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.