We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 6-pin male to three angled Molex 4-pin female power cable, 50+15+15 cm 18AWG

YEPLOOK

YEPLOOK 6Pin to 3× Molex 4Pin angled power cable 50+15+15 cm 18AWG black

SKU CH-S222-Y6CZG

A 6-pin to triple Molex 4-pin angled cable with 50, 15 and 15 cm legs for Corsair Type 3 and 4 modular PSUs

  • ColorBlack
  • Connect three Molex devices from one 6-pin PSU port
  • 50 cm lead plus two 15 cm branches reach multiple bays
  • 18 AWG UL1007 tinned copper handles high current safely
  • Angled 6-pin plug fits tight spaces in Corsair Type 3 and 4 PSUs
  • Flexible jacket bends easily for clean cable routing

Cable purpose and compatibility

This angled 6-pin to triple Molex cable connects legacy drives and fans to Corsair Type 3 or Type 4 modular power supplies. It suits builders adding PATA hard drives, optical drives or floppy drives to a supported AXi, HXi, HX Gold, RM, or CX-M unit. It will not work with Corsair Type 1 or Type 2 PSUs or with other brands.

Wire gauge and routing

The cable uses UL1007 tinned-copper 18AWG conductors rated for heat resistance and long-term durability. Total length is 50 cm from the PSU connector to the first Molex, then 15 cm between each of the three Molex plugs. The flexible jacket bends easily for clean routing inside tight cases.

Connector details and constraints

The 6-pin male end plugs directly into the modular port on compatible Corsair supplies; two unused pin positions are normal. Each Molex 4-pin female connector powers one peripheral such as a fan, optical drive or older hard drive. No adapters or software are included.

Highlights

  • Connect three Molex devices from one 6-pin PSU port
  • 50 cm lead plus two 15 cm branches reach multiple bays
  • 18 AWG UL1007 tinned copper handles high current safely
  • Angled 6-pin plug fits tight spaces in Corsair Type 3 and 4 PSUs
  • Flexible jacket bends easily for clean cable routing

Specifications

ColorBlack

Questions about this item

How do I connect the 6-pin male end to my Corsair AX860i modular PSU?

Plug the 6-pin male connector directly into a peripheral port on the AX860i; the cable is keyed for Corsair Type 3 and 4 units only and will not fit Type 1 or 2 supplies.

Will the three Molex 4-pin female connectors need replacement over time?

The 18AWG UL1007 tinned copper wires are heat resistant and not prone to ageing, so the Molex ends should not require replacement under normal use.

What is the maximum load this 50 cm lead can handle continuously?

The cable uses 18AWG conductors rated for typical peripheral draws; sustained loads near the PSU's peripheral rail limit will hit the wire gauge capacity first.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.