We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 6-pin to three angled Molex 4-pin power cable, 50+15+15 cm, 18 AWG

YEPLOOK

YEPLOOK 6Pin to 3× Molex 4Pin Angled Cable for Corsair RM550x RM650x RM750x RM850x RM1000x Type 4 PSU

SKU CH-39H4-4ZT73

Connects Corsair Type 3 and Type 4 modular PSUs to three Molex devices using 18AWG wire with an angled 6‑pin plug

  • ColorBlack
  • Connects Corsair Type 4 PSUs to legacy Molex devices
  • 6-pin male plug fits RM550x RM650x RM750x RM850x RM1000x units
  • 18AWG UL1007 tinned copper wire resists heat and aging
  • Angled connector eases routing in tight case spaces
  • Three Molex 4-pin outputs power fans drives and peripherals

Compatible Corsair Type 4 PSU cable

This new YEPLOOK cable connects a Corsair Type 4 modular power supply to up to three Molex devices. It fits RM550x, RM650x, RM750x, RM850x and RM1000x units. The 6-pin male end plugs into the PSU while three 4-pin female connectors power fans, older drives or peripherals. Black 18AWG UL1007 tinned copper wire resists heat and stays flexible for tidy routing.

Replaces missing or short Molex leads

Use this cable when your Corsair Type 4 PSU lacks enough native Molex connectors for legacy hardware. The angled 6-pin plug eases insertion in tight bays and the 50, 15 and 15 centimetre segments let you reach multiple devices without daisy-chaining adapters. It is not compatible with Corsair Type 1 or Type 2 power supplies or any non-Corsair brand.

Check PSU label before ordering

Verify that your power supply is a Corsair RMx series unit labelled Type 3 or Type 4. The pinout is unique to these models and using the cable on other PSUs can cause damage. Confirm you have a free 6-pin peripheral port on the modular panel. Ensure the three Molex connectors match the devices you intend to power.

Highlights

  • Connects Corsair Type 4 PSUs to legacy Molex devices
  • 6-pin male plug fits RM550x RM650x RM750x RM850x RM1000x units
  • 18AWG UL1007 tinned copper wire resists heat and aging
  • Angled connector eases routing in tight case spaces
  • Three Molex 4-pin outputs power fans drives and peripherals

Specifications

ColorBlack

Questions about this item

What PSU connector does the 6-pin male end plug into?

The 6-pin male connector plugs directly into Corsair Type 3 and Type 4 modular PSUs such as the RM550x, RM650x, RM750x, RM850x and RM1000x.

How do I route the 50 cm lead and the two 15 cm branches without stressing the angled plugs?

Run the 50 cm section to the first device, then use the flexible 18 AWG wire to bend the two 15 cm tails toward the remaining Molex ports, keeping the angled connectors seated straight.

When should I replace the 18 AWG UL1007 tinned copper wires?

Replace the cable if the insulation cracks, the tinned copper shows corrosion, or any Molex pin becomes loose enough to cause intermittent power.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.