YEPLOOK
YEPLOOK 6-Pin to 3 SATA Power Cable 50+15+15cm 18AWG
Connects a Corsair Type 4 or Type 3 modular PSU to three SATA drives using 18 AWG wire with 50+15+15 cm lengths
- ColorBlack
- Powers three SATA drives from one 6-pin PSU connector
- 18 AWG UL1007 wire handles sustained current without overheating
- 50 cm lead plus two 15 cm drops simplifies cable routing
- Compatible with Corsair Type 4 and Type 3 modular PSUs
- Straight SATA plugs fit SSDs, HDDs and riser cards directly
What this cable connects
This YEPLOOK cable adapts a single 6-pin Type 4 modular PSU output into three SATA power connectors. It is built for owners of Corsair HXi, AXi, HX Gold or RM series units who need to power multiple SSDs, hard drives or riser cards from one port.
Builders with compatible Corsair PSUs
The pinout matches Corsair Type 4 and backward-compatible Type 3 supplies only; using it with other brands or series can cause damage. Buyers who need a different modular pinout or who want to power devices requiring another connector type should look elsewhere.
50 cm lead plus two 15 cm branches
The 18 AWG UL1007 wiring runs 50 cm from the PSU to the first SATA plug, then 15 cm to each of the next two connectors, giving enough reach for typical drive cages while keeping cable routing tidy.
Highlights
- Powers three SATA drives from one 6-pin PSU connector
- 18 AWG UL1007 wire handles sustained current without overheating
- 50 cm lead plus two 15 cm drops simplifies cable routing
- Compatible with Corsair Type 4 and Type 3 modular PSUs
- Straight SATA plugs fit SSDs, HDDs and riser cards directly
Specifications
| Color | Black |
|---|
Questions about this item
Does the 18AWG wire on this 50+15+15cm cable run hot when three SATA drives spin all day?
The UL1007 18AWG conductors are rated for continuous current and heat resistance, so they stay cool under normal multi-drive loads.
Which modular PSU connector must I already have free to plug this 6-pin cable in?
You need an available Type 4 or Type 3 peripheral 6-pin port on a compatible Corsair PSU such as the HX750i, HX850i, HX1000i or HX1200i.
Will the straight SATA plugs on this cable clear the tighter drive bays on my older HX650 or RM450 build?
Yes, the straight SATA connectors fit standard drive bays and the cable is fully compatible with Corsair HX650, HX750, HX850, HX1050 and RM450 units.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



