We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 6-pin to three angled Molex 4-pin power cable, 18AWG, 50+15+15cm length

YEPLOOK

YEPLOOK 6-Pin to 3× Molex 4-Pin Angled Power Cable for Corsair Type 4 PSU, 18AWG 50+15+15cm

SKU CH-AEPK-F07AY

Connects Corsair Type 4 PSUs to three Molex devices using 18AWG cable with angled connectors

  • ColorBlack
  • Connects three Molex devices from one PSU port
  • 6-pin male plugs into Corsair Type 4 modular supplies
  • 18AWG tinned copper wire rated UL1007 for durability
  • Angled connectors simplify routing in tight cases
  • 50+15+15cm total length reaches multiple drive bays

Corsair Type 4 modular PSU cable

This 6-pin to triple Molex cable connects Corsair AX1600i, AX1000 and AX850 Titanium Type 4 modular power supplies to legacy peripherals. The 18 AWG UL1007 tinned copper conductors are heat resistant and durable. Two unused pins on the 6-pin connector are normal and not a defect. Buyers must confirm their exact PSU model before purchase because pinouts differ between brands and series.

Build integration and cable routing

The 50 cm lead from the PSU splits into three 15 cm branches for drives, fans or older optical devices. Angled Molex heads reduce strain in tight drive bays and the flexible jacket simplifies cable management. The harness frees a single peripheral port to serve up to three Molex devices. Systems without Molex peripherals or with non-Corsair Type 4 units cannot use this cable.

Capacity and headroom

Each 18 AWG branch delivers sufficient current for typical hard drives, cooling fans and legacy optical drives. The three-device split shares the single 6-pin rail, so total draw must stay within the PSU peripheral rating. Very high-current accessories or more than three devices will exceed the harness design.

Highlights

  • Connects three Molex devices from one PSU port
  • 6-pin male plugs into Corsair Type 4 modular supplies
  • 18AWG tinned copper wire rated UL1007 for durability
  • Angled connectors simplify routing in tight cases
  • 50+15+15cm total length reaches multiple drive bays

Specifications

ColorBlack

Questions about this item

How many Molex devices can I run from the single 6-pin PSU connector?

The cable splits one 6-pin Type 4 connector into three Molex 4-pin female plugs, so you can power up to three drives or fans from one modular port.

Will the 18AWG wires handle continuous load from multiple hard drives without overheating?

The UL1007 tinned-copper 18AWG conductors are rated for the current drawn by typical Molex peripherals and are heat-resistant for sustained operation inside a case.

Which Corsair power supplies accept the 6-pin end of this cable?

It fits Corsair Type 3 and Type 4 modular PSUs including AX1600i, AX1000, AX850 Titanium, HX1200i, HX1000i, HX850i, HX750i, HX650i, HX550i, HX1050, HX850, HX750, HX650 and RM series units.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.