We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular SSI CEB motherboard, black PCB with silver sockets and blue expansion slots

Yaokong

Yaokong motherboard accessory for ASUS P9X79-E WS LGA 2011

SKU CH-H40B-GCDGR

Replacement accessory kit for ASUS X79 workstation board with LGA 2011 socket and SSI CEB layout

  • Designed for ASUS P9X79-E WS LGA 2011 Intel X79 motherboard
  • SSI CEB form factor fits 30.48cm x 26.67cm workstation chassis
  • 8 memory slots support ECC and non-ECC RAM configurations
  • 7 PCI Express x16/x8 slots enable multi-GPU expansion
  • 10 SATA cables plus SLI bridges included for storage and graphics setup

Accessory for ASUS P9X79-E WS LGA 2011

This Yaokong accessory is designed for the ASUS P9X79-E WS motherboard using the Intel X79 chipset and LGA 2011 socket. It suits builders working on an SSI CEB form factor platform with 8 memory slots and multiple expansion slots. The item is supplied new.

Compatibility check before ordering

Verify that your system uses the ASUS P9X79-E WS board with an Intel X79 chipset and LGA 2011 socket. Confirm the SSI CEB form factor fits your chassis and that your power supply provides the required 24-pin and 8-pin ATX12V connectors. Ensure your CPU cooler clearance matches the board layout.

Thermals noise and power draw

The accessory itself adds no active cooling or power draw; thermal and acoustic performance depends on the host motherboard and installed components. The board supports SATA 300 and 600 interfaces with multiple RAID modes across Intel, Marvell 88SE9230 and ASMedia ASM1061 controllers. Power delivery uses standard 24-pin and 8-pin connectors.

Highlights

  • Designed for ASUS P9X79-E WS LGA 2011 Intel X79 motherboard
  • SSI CEB form factor fits 30.48cm x 26.67cm workstation chassis
  • 8 memory slots support ECC and non-ECC RAM configurations
  • 7 PCI Express x16/x8 slots enable multi-GPU expansion
  • 10 SATA cables plus SLI bridges included for storage and graphics setup

Specifications

No published specifications for this item yet.

Questions about this item

Does the package include every cable and bridge I need for a multi-GPU build?

The box supplies ten Serial ATA cables, one three-way SLI bridge, one four-way SLI bridge and one additional SLI bridge, covering typical multi-GPU cabling.

Which SATA controller should I use for the fastest SSD performance?

Connect high-speed SSDs to the two native Intel SATA-600 ports or the four Marvell 88SE9230 SATA-600 ports; the ASMedia ASM1061 ports are external.

What does the eight-slot memory layout mean for total RAM capacity?

With eight DIMM slots you can populate up to eight modules, allowing very high total capacity when using large-capacity registered or unbuffered DIMMs.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.