We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Matte black G1/4 inch male-to-male rotary fitting with 360 degree rotation

XSPC

XSPC G1/4" Male-Male Rotary Fitting Matte Black 360° diy cooling

SKU CH-1ZM4-KVT0C GTIN 5060175588562

G1/4" male-to-male rotary fitting with 360° rotation for custom water-cooling loops

  • TypeFittings
  • ColorBlack
  • 360° rotation simplifies tube routing
  • G1/4" threads connect standard water-cooling parts
  • Male-to-male design joins two female ports directly
  • Matte black finish matches dark-themed builds
  • Tool-free installation speeds up loop assembly

G1/4" Male-Male Rotary Fitting

This XSPC fitting connects two G1/4" female ports in a custom liquid-cooling loop. The matte black finish matches dark-themed builds while the 360° rotary design lets you align tubing without stress on the threads. Tool-free installation speeds up assembly and maintenance. Model 5060175588562 is supplied new.

Builders aligning rigid tubing runs

The rotary joint suits builders who need to orient hard-line tubing precisely after the fitting is seated. It is not for systems that use only soft tubing with simple push-fit connectors. Buyers who want a fixed-angle elbow or a bulkhead pass-through should look at a different fitting type.

Verify thread compatibility and loop layout

Confirm every component in your loop uses G1/4" threads before ordering. Plan the tubing path so the rotary section has room to rotate freely after final tightening. Check that your reservoir, radiator, pump and blocks all present female G1/4" ports for a direct male-to-male connection.

Highlights

  • 360° rotation simplifies tube routing
  • G1/4" threads connect standard water-cooling parts
  • Male-to-male design joins two female ports directly
  • Matte black finish matches dark-themed builds
  • Tool-free installation speeds up loop assembly

Specifications

TypeFittings
ColorBlack

Questions about this item

What thread size must my water-cooling components have to connect with this G1/4" male-to-male rotary fitting?

Both ends use standard G1/4" threads, so any block, radiator, reservoir or tubing adapter with a matching G1/4" female port will screw straight in.

Will the 360° rotation let me align this matte-black fitting with rigid tubing runs that were planned for fixed-angle fittings?

Yes, the rotary joint spins freely through 360 degrees, letting you clock the fitting to any orientation without stressing rigid tubes or disturbing existing loop geometry.

After installation, how can I confirm the rotary seal is holding pressure in my loop?

Pressurise the system and watch the joint; a steady pressure reading with no coolant seepage at the rotating interface shows the seal is working as intended.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.