XLQJVPO WiFi 6 6E Network Antenna 2.4G/5G Magnetic Base 80cm Cable
Magnetic-base WiFi 6 and WiFi 6e antenna with 80 cm SMA cable for motherboards that have dual inner-pin ports
- TypeWi-Fi antenna for various motherboards
- ColorBlack
- SpecificationsWi-Fi antenna for various motherboards
- FeaturesWi-Fi antenna for various motherboards
- Supports WiFi 6 and WiFi 6e for faster wireless speeds
- Magnetic base allows flexible antenna placement for optimal reception
- 80 cm cable length provides extended reach for desktop setups
- SMA connector with RP-SMA compatibility fits many motherboard Wi-Fi cards
- Compatible with Intel AX200, AX201, AX210, AX211 and other listed modules
External WiFi 6 6E Antenna
This dual-band antenna connects to motherboards with dual SMA inner-pin ports and supports WiFi 6 and WiFi 6e standards. The magnetic base allows flexible placement on a desktop case for improved reception. An 80 cm cable links the antenna to the SMA or RP-SMA connector on a compatible PCI-E wireless card. It works with Intel AX200, AX201, AX210, AX211 and earlier wireless modules.
Replaces stock whip antennas
The unit upgrades the short fixed antennas that ship with many ASUS ROG Strix Z590, Z690 and Z790 boards as well as Gigabyte, MSI, ASRock, Biostar and Colorful WiFi models. The longer cable lets you move the antenna away from metal panels and power supplies that degrade signal. The gain is worthwhile when the rear I/O area is crowded or the case sits under a desk.
Limited by SMA connector and cable length
The RP-SMA interface caps the maximum practical cable run at the supplied 80 cm; longer runs would increase loss beyond the antenna's gain. Tri-band 2.4G/5G operation covers 802.11a/b/g/n/ac/ax but the antenna cannot add 6 GHz support to a card that lacks WiFi 6e hardware. Bluetooth co-existence depends on the wireless module, not the antenna itself.
Highlights
- Supports WiFi 6 and WiFi 6e for faster wireless speeds
- Magnetic base allows flexible antenna placement for optimal reception
- 80 cm cable length provides extended reach for desktop setups
- SMA connector with RP-SMA compatibility fits many motherboard Wi-Fi cards
- Compatible with Intel AX200, AX201, AX210, AX211 and other listed modules
Specifications
| Brand | XLQJVPO |
|---|---|
| Type | Wi-Fi antenna for various motherboards |
| Color | Black |
| Specifications | Wi-Fi antenna for various motherboards |
| Features | Wi-Fi antenna for various motherboards |
Questions about this item
What SMA connectors does the 80 cm antenna cable require on the motherboard?
The cable uses an SMA male plug that mates with the two SMA inner-pin ports found on compatible Wi-Fi motherboards and PCI-E cards.
How should the magnetic base be positioned for the strongest signal?
Place the base on a flat metal surface away from the case interior, then rotate the dipole until throughput peaks; the 80 cm lead lets you reach clear air.
When should the antenna cable be replaced?
Replace the cable if the SMA threads strip, the coaxial jacket is kinked, or signal drops persist after reseating both ends.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
