We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

xiwai

xiwai DisplayPort to DVI Male Single Link Cable 5.91 ft

SKU CH-HQA1-78FY2

Connects a DisplayPort 1.1a computer to a DVI monitor at up to 1080p resolution over 5.91 ft

  • Cable Length5.91 ft.
  • Connect DisplayPort PCs to DVI monitors
  • 91 ft cable reaches across desks
  • DisplayPort 1.1a input supports 1080p video
  • 25 Gbps per channel bandwidth for clear images
  • 12-bit per channel deep colour for smooth gradients

DisplayPort 1.1a to DVI Single Link Cable

This 5.91 ft cable connects a DisplayPort 1.1a source to a DVI display using a 20-pin male plug and a 24+1 pin male plug. It suits users linking a modern PC or notebook to an older CRT, LCD monitor, or projector that lacks a DisplayPort input.

Passive Design With No External Power

The cable draws power directly from the DisplayPort output and requires no separate adapter or power supply. Its passive construction means silent operation and zero added heat, making it suitable for quiet office or home-theatre setups.

Sustained 1080p At 225 MHz Bandwidth

The link maintains a 225 MHz pixel clock with 2.25 Gbps per channel for a total 6.75 Gbps throughput. It supports 12-bit per channel deep colour at 1080p resolution continuously, without the signal degradation that can appear on longer or lower-specification cables.

Highlights

  • Connect DisplayPort PCs to DVI monitors
  • 91 ft cable reaches across desks
  • DisplayPort 1.1a input supports 1080p video
  • 25 Gbps per channel bandwidth for clear images
  • 12-bit per channel deep colour for smooth gradients

Specifications

Cable Length5.91 ft.

Questions about this item

How do I install the DisplayPort male 20pin connector and avoid the upside-down insertion mistake?

Align the flat side of the DisplayPort male 20pin plug with the port notch, push straight in until the latch clicks, then secure the DVI male 24+1 end with its two thumbscrews; forcing the DP plug upside down bends the internal pins.

What maintenance or replacement will the DVI male 24+1 connector need later?

The DVI male 24+1 connector requires no scheduled maintenance; if the thumbscrews loosen over time, retighten them by hand, and replace the cable only if the 1080p signal degrades or pins bend.

What limit appears first during sustained 1080p use at 225 MHz bandwidth?

The single-link DVI interface caps resolution at 1080p and bandwidth at 225 MHz or 2.25 Gbps per channel, so extended sessions cannot exceed that ceiling regardless of the DisplayPort 1.1a source.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.