We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White mesh paracord sleeved PCIe 5.0 power extension cable with dual 6+2pin to 12+4pin connectors

Xenlazar

Xenlazar Superior 600W PCIe 5.0 12VHPWR White Mesh Paracord Computer Power Extension Cord

SKU CH-EMNY-QBWDG

A 16AWG dual 6+2pin to 12+4pin extension cable delivers up to 600W to PCIe 5.0 graphics cards without an adapter

Color White

  • Delivers up to 600W to PCIe 5.0 graphics cards
  • 16AWG dual 6+2pin to 12+4pin construction handles high current
  • Flexible mesh paracord sleeving gives a clean professional look
  • Direct 12+4pin connection removes the need for an adapter
  • White colour matches light-themed builds

Cable purpose and fit

This extension cord connects a dual 6+2-pin power-supply output to the 12+4-pin connector found on PCIe 5.0 graphics cards. It is built for builders who need a clean, white-sleeved link without using an adapter. The 16 AWG conductors are rated for cards drawing up to 600 W. Compatibility covers PSUs from Antec, Coolermaster, Corsair, MSI, Enermax, Gigabyte and Thermaltake.

What it replaces and when to upgrade

The cord replaces a stock PCIe cable or a two-piece adapter chain that adds bulk and clutter. Switching to this single-run design is worth it when cable routing space is tight or when a uniform white aesthetic matters. It also removes the mechanical stress of an adapter junction at the GPU socket. Builders keeping an older PSU with only 6+2-pin outputs gain a direct path to a 12+4-pin card.

Practical limits of the PCIe 5.0 power interface

The 12+4-pin connector tops out at 600 W, so cards exceeding that rating cannot be powered safely with this cord. The dual 6+2-pin source must be on separate PSU rails or cables to meet the current demand. Length is fixed, so case layouts requiring a longer run will need a different solution. The mesh paracord sleeving adds stiffness compared with unsleeved wire, which can affect tight bends behind the motherboard tray.

Highlights

  • Delivers up to 600W to PCIe 5.0 graphics cards
  • 16AWG dual 6+2pin to 12+4pin construction handles high current
  • Flexible mesh paracord sleeving gives a clean professional look
  • Direct 12+4pin connection removes the need for an adapter
  • White colour matches light-themed builds

Specifications

No published specifications for this item yet.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What connector clearance does the 12+4pin end need to seat on a PCIe 5.0 graphics card?

The 12+4pin connector plugs directly into the GPU native socket without an adapter, so allow space for the straight plug and the paracord sleeving behind it.

Which end connects to the power supply and how are the pins arranged?

Two 6+2pin plugs go into the PSU PCIe ports; push each until the latch clicks and keep the two cables separate to avoid cross-loading a single rail.

When should the white mesh paracord sleeving be inspected or the cable replaced?

Check the sleeving for fraying or kinks after any rebuild and replace the cord if the 16AWG wires are exposed or the 12+4pin latch no longer holds.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.