We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Flat black Cat6a Ethernet cable with clear RJ45 boots, 50 ft length

Xcftaud Cat6a Slim Ethernet Cable 50 ft 28AWG Black

SKU CH-3MN6-GPAAH

A 50 ft Cat6a slim patch cable delivers 10 Gbps at 550 MHz using 28 AWG pure copper that is 60 % thinner than standard cable for tight-space routing

  • TypeEthernet
  • Cat6A
  • Connector ARJ45
  • ColorBlack
  • FeaturesData Transfer, High Speed, , ,
  • 10 Gbps and 550 MHz bandwidth for high-speed networking
  • 28 AWG pure copper conductor at 60 % standard thickness
  • Snagless boot protects latch and shows port status lights
  • Flexible jacket bends in any direction for tight-space routing
  • 50 ft length suits home, office and data-centre runs

Slim 50 ft Cat6a for tight installs

This 50 ft Cat6a patch cable uses 28AWG pure copper conductors that are roughly 60 percent thinner than standard Ethernet cable. The slim profile lets you route the link through crowded racks, behind furniture or along narrow cable trays where bulkier cords will not fit. It targets installers and home users who need a 10 Gbps link without the stiffness of regular patch leads.

Thermals noise and power

Passive copper construction means the cable generates no heat, produces no audible noise and draws no power of its own. It simply carries the signal between powered ports, so thermal load and acoustic impact are entirely determined by the connected switches, routers or servers. The 550 MHz bandwidth rating supports sustained 10 Gbps throughput without signal degradation that could force retransmissions.

Snagless boot and PoE support

Clear snagless boots protect the RJ45 latch from catching on adjacent cables and let you see port status LEDs without removing the connector. Strain relief at each end reduces stress on the conductor during repeated plugging and unplugging. The cable meets PoE and PoE+ standards, so it can deliver power to access points, cameras or VoIP phones over the same run that carries data.

Highlights

  • 10 Gbps and 550 MHz bandwidth for high-speed networking
  • 28 AWG pure copper conductor at 60 % standard thickness
  • Snagless boot protects latch and shows port status lights
  • Flexible jacket bends in any direction for tight-space routing
  • 50 ft length suits home, office and data-centre runs

Specifications

BrandXcftaud
TypeEthernet
Cat6A
Connector ARJ45
ColorBlack
FeaturesData Transfer, High Speed, , ,

Questions about this item

How do I route the 28 AWG Cat6a cable through a tight cable tray without damaging the conductors?

The 28 AWG pure copper conductors are 60 % thinner than standard cable, so they bend easily in any direction; avoid kinking by maintaining a gentle radius and use the snagless boots to protect the RJ45 tabs during pulls.

Will the RJ45 contacts degrade if I power a PoE+ access point through this 50 ft run?

The cable supports PoE and PoE+ standards, and the pure copper conductors handle the current without excess voltage drop over 50 ft; inspect the clear boots periodically for discolouration that signals contact wear.

At what point does the 550 MHz bandwidth limit appear when I run sustained 10 Gbps transfers?

The 550 MHz rating supports 10 Gbps across the full 50 ft; the first practical limit is usually connector seating or bend-induced crosstalk, not the cable’s rated bandwidth itself.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.