WRIARICH
WRIARICH UT-3112 SATA to USB 3.0 Hard Drive Adapter with 12V/2A Power
Connect 2.5 or 3.5 SATA drives and optical drives via USB 3.0 with included 12V power adapter
- Changer TypeUSB to SATA
- Connect 2.5 and 3.5 inch SATA drives via USB
- Achieve up to 6 Gbps transfer speeds with SSDs
- Power 3.5 inch drives using included 12V 2A adapter
- Works with SATA SSDs HDDs and optical drives
- Backward compatible with USB 2.0 and 1.1 ports
SATA to USB 3.0 adapter for 2.5 and 3.5 drives
This adapter connects any 2.5 or 3.5 inch SATA SSD, HDD or optical drive to a USB 3.0 port. It suits users who want to add external storage, clone a drive or recover data from a laptop or desktop without opening the case. The included 12V/2A power supply lets larger 3.5 inch drives spin up reliably.
UASP support and 5 Gbps transfer ceiling
USB 3.0 with UASP protocol reduces overhead during long copy or imaging jobs so sustained throughput stays closer to the 5 Gbps link speed. Actual rates depend on the attached drive and host controller, but the adapter does not throttle after a short burst. Backward compatibility with USB 2.0 and 1.1 ports is maintained.
Gold-finger contacts and flexible cable
The connector uses gold-plated fingers for durable mating cycles and the 30m tape specification indicates high-temperature resistant insulation on the internal wiring. A single integrated cable carries both data and power, so no separate SATA power lead is needed. The compact form factor fits alongside other ports on a busy hub or laptop side.
Highlights
- Connect 2.5 and 3.5 inch SATA drives via USB
- Achieve up to 6 Gbps transfer speeds with SSDs
- Power 3.5 inch drives using included 12V 2A adapter
- Works with SATA SSDs HDDs and optical drives
- Backward compatible with USB 2.0 and 1.1 ports
Specifications
| Changer Type | USB to SATA |
|---|
Questions about this item
Does the 12V/2A power adapter make the UT-3112 run hot or noisy when a 3.5" drive is connected all day?
The adapter includes a 12V/2A supply for 3.5" drives; it has no fan, so operation is silent and heat stays low under normal use.
What must I already have to use this SATA-to-USB 3.0 cable with a 2.5" SSD?
You need a free USB 3.0 port (also works with USB 2.0/1.1) and a 2.5" SATA SSD or HDD; no extra drivers are required.
Will the UT-3112 work with an older SATA DVD-RW drive I still keep?
Yes — the adapter supports SATA optical drives such as DVD-RW, CD-RW and Blu-ray combo units alongside 2.5" and 3.5" SATA disks.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



