We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular adapter with USB-C and USB 3.0 ports, SATA and IDE connectors, and included power supply

WRIARICH

WRIARICH USB-C & USB 3.0 to SATA IDE Hard Drive Adapter

SKU CH-70WP-8VJ3Z

Connects 2.5 or 3.5 SATA and IDE drives to USB 3.0 or USB-C ports for data transfer and backup, includes 12 V power adapter

  • ColorBlack
  • Changer TypeSATA IDE to USB
  • SpecificationsThese hard drive adapters convert SATA or IDE interfaces to
  • FeaturesThis IDE SATA to USB 3.0 adapter implements a bridge between
  • Dimensions3.74 x 2.6 x 0.6 inches
  • Weight8.8 ounces
  • Connect 2.5 or 3.5 SATA and IDE drives via USB
  • Transfer data at up to 5 Gbps with USB 3.0
  • Power 3.5-inch drives using included 12V 2A adapter
  • Works plug-and-play on Windows macOS and Linux
  • Compact 3.74 x 2.6 x .6 inch design weighs 8.8 ounces

SATA IDE to USB adapter for legacy and modern drives

The WRIARICH adapter bridges SATA and IDE storage devices to a USB 3.0 or USB-C port, letting you access 2.5-inch and 3.5-inch hard drives, SSDs, and 5.25-inch optical drives externally. It targets users migrating data from older systems, recovering files from archived drives, or cloning disks without opening a computer case. Plug-and-play operation works on Windows, macOS, and Linux without driver installation.

Sustained transfer up to 5 Gbps across mixed

The USB 3.0 interface delivers SuperSpeed performance rated at 5 Gbps, maintaining consistent throughput during extended copy, backup, or cloning sessions rather than only in short bursts. The bridge chip handles SATA I, SATA II, and ATA/ATAPI protocols, so mechanical hard drives and optical drives keep streaming data without the adapter becoming the bottleneck. No active cooling is required on the adapter itself during prolonged use.

Low heat and silent operation

A dedicated 12 V 2 A power adapter feeds 3.5-inch drives and optical units that exceed USB bus power limits, preventing voltage sag and drive resets under load. The compact black enclosure measures 3.74 by 2.6 by 0.6 inches and weighs 8.8 ounces, dissipating minimal heat passively while running silently. Power draw scales with the attached drive, so a 2.5-inch SSD draws far less than a spinning 3.5-inch HDD.

Highlights

  • Connect 2.5 or 3.5 SATA and IDE drives via USB
  • Transfer data at up to 5 Gbps with USB 3.0
  • Power 3.5-inch drives using included 12V 2A adapter
  • Works plug-and-play on Windows macOS and Linux
  • Compact 3.74 x 2.6 x .6 inch design weighs 8.8 ounces

Specifications

ColorBlack
Changer TypeSATA IDE to USB
SpecificationsThese hard drive adapters convert SATA or IDE interfaces to USB, enabling external connection of hard disk drives (HDDs) or optical drives to computers without SATA/IDE ports
FeaturesThis IDE SATA to USB 3.0 adapter implements a bridge between a USB port and one SATA, ATA,or ATAPI basATAPI-based mass storage device port. It could turns any standard IDE or SATA drive into a convenient external drive. Easily transfer files from computer or notebook, back up files, or store large file archives on hard drives
Support SATA II/I and IDE interface, including 2.5" and 3.5" SATA I/ SATA II HDD / SSD DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD + RW Optical Drive.
Dimensions3.74 x 2.6 x 0.6 inches
Weight8.8 ounces
Package Quantity1
Package Contents1 x SATA Adapter,
1 x USB Cable,
1 x 12V2A Power Adapter,
1 x 4Pin Cable for 3.5" IDE Drive

Questions about this item

How hot does the adapter get when a 3.5" drive runs all day?

The unit draws power from the included 12V 2A supply, so the adapter itself stays cool while the drive handles its own heat.

What must I already own to use this adapter with a 3.5" IDE drive?

You need a free USB-A or USB-C port on the host computer; the kit supplies the 12V 2A power adapter and the 4-pin IDE power cable.

Will a 5.25" optical drive work alongside a modern SSD on the same machine?

Yes — the adapter supports 5.25" CD/DVD drives and 2.5"/3.5" SATA SSDs simultaneously through separate connections.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.