We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black USB 3.0 male to SATA female adapter cable, half metre long

WRIARICH

WRIARICH USB 3.0 to SATA Adapter Cable .5M Black

SKU CH-YPG7-DCJZQ

Connects 2.5-inch SSDs and 3.5-inch HDDs up to 18 TB via USB 3.0 at 5 Gbps with UASP acceleration, includes LED status and auto-sleep, requires separate 12 V power for 3.5-inch drives

  • ColorBlack
  • Cable Length0.5M
  • Connector Detail1 x USB 3.0 to 1 x SATA
  • Terminal GenderMale to Female
  • FeaturesThe usb 3.0 to SATA converter is widely compatible with Wind
  • Connect 2.5" SATA SSD or HDD without an enclosure — just plug and play
  • Transfer data at up to 5 Gbps with UASP acceleration — 70% faster reads and 40% faster writes on UASP hosts
  • Works with Windows 11, 10, 8.1, 7, Vista, XP, Mac OS 9, 10, 11, Linux and Chrome OS
  • Supports 3.5" HDD up to 18 TB with 12 V 2 A power adapter — not included
  • Blue LED shows activity and adapter auto-sleeps after 3 minutes to save power

SATA Drive Adapter with USB 3.0

This cable connects a 2.5" or 3.5" SATA hard drive or SSD to a USB-A port on a laptop, desktop, tablet or router. It supports drives up to 18TB and works with Windows, macOS, Linux and Chrome OS without installing drivers. A separate 12V power adapter is required for 3.5" drives and is not included.

Sustained Transfer with UASP

The adapter reaches 5 Gbps and supports UASP and TRIM for faster sustained throughput. When the host also supports UASP, reads run 70% faster and writes 40% faster than standard USB 3.0. The connection falls back to USB 2.0 or 1.1 where needed. Actual speed depends on the drive and host capabilities.

Low-Power Sleep and Status LED

A blue LED shows activity and the adapter enters sleep mode after three minutes of inactivity to reduce power draw. The short 0.5 m cable keeps the setup tidy and limits voltage drop. No fan or active cooling is present, so operation stays silent.

Highlights

  • Connect 2.5" SATA SSD or HDD without an enclosure — just plug and play
  • Transfer data at up to 5 Gbps with UASP acceleration — 70% faster reads and 40% faster writes on UASP hosts
  • Works with Windows 11, 10, 8.1, 7, Vista, XP, Mac OS 9, 10, 11, Linux and Chrome OS
  • Supports 3.5" HDD up to 18 TB with 12 V 2 A power adapter — not included
  • Blue LED shows activity and adapter auto-sleeps after 3 minutes to save power

Specifications

ColorBlack
Cable Length0.5M
Connector Detail1 x USB 3.0 to 1 x SATA
Terminal GenderMale to Female
FeaturesThe usb 3.0 to SATA converter is widely compatible with Windows 11,10, 8, 8.1, 7, Vista, XP or above, Mac OS 9, 10, 11 or later, Linux, Chrome os etc.

Questions about this item

Does the adapter run hot or make noise when transferring data continuously?

The adapter has a blue LED indicator and an auto-sleep feature that activates after 3 minutes of inactivity to reduce energy consumption, with no moving parts to generate noise.

What separate power source is required to use a 3.5-inch hard drive with this adapter?

A 12V/2A DC power adapter is required for 3.5-inch HDDs and is not included; the adapter provides a reserved DC-Jack port for this connection.

Will this adapter work with my older 3.5-inch SATA hard drive that uses an earlier SATA revision?

Yes, it supports 3.5-inch HDDs up to 18TB and is compatible with SATA III, II, and I drives, connecting via USB 3.0 or backward compatible USB 2.0 and 1.1 ports.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.