WRIARICH
WRIARICH PCIe 5.1 12VHPWR Power Splitter Cord 600W 180° Right Angle Purple
A 12VHPWR adapter with a 180-degree right-angle connector delivers up to 600W to RTX 3090Ti, 4070Ti, 4080 and 4090 graphics cards
- TypeSpeaker Wires
- ColorBlack
- Connector Number3
- Connector DetailDVI to DVI
- Terminal GenderFemale to Female
- Specifications12VHPWR, EZDIY-FAB, EZDPI189-40, Graphics Cards, NVIDIA RTX
- Right-angle design prevents cable stress in tight cases
- 600W rating supports high-end GPU power demands
- 12VHPWR connector fits RTX 3090Ti 4070Ti 4080 4090 cards
- Aluminium shell adds durability and aids heat dissipation
- 2oz copper 4-layer PCB handles sustained heavy loads
Angled 12VHPWR Splitter for RTX Cards
This WRIARICH power splitter cord adapts a PCIe 5.1 12VHPWR connector into an 180-degree right-angle plug rated for 600W. It targets builders fitting RTX 3090Ti, 4070Ti, 4080 or 4090 graphics cards where straight cables foul the side panel or obstruct airflow. The purple mech-armor housing adds a distinctive look inside the case.
Tool-free fit with a tight tolerance check
Installation is a simple push-on action: seat the 16-pin adapter onto the card's 12+4 socket until the latch clicks, then route the incoming 12VHPWR cable. The rigid aluminium shell prevents wire bending but leaves almost no wiggle room; if the card's connector is recessed or offset the adapter can bottom out before full contact. The MSI GeForce RTX 4090 Suprim Liquid X 24G is explicitly listed as incompatible.
Verify clearance and power source first
Measure the gap between the GPU power socket and the side panel to confirm the 180-degree bend clears the glass. Ensure your power supply provides a native 12VHPWR or 12V-2x6 output — this splitter does not convert older 8-pin PCIe leads. Check that the PSU cable length reaches the adapter's new position without tension on the connector.
Highlights
- Right-angle design prevents cable stress in tight cases
- 600W rating supports high-end GPU power demands
- 12VHPWR connector fits RTX 3090Ti 4070Ti 4080 4090 cards
- Aluminium shell adds durability and aids heat dissipation
- 2oz copper 4-layer PCB handles sustained heavy loads
Specifications
| Brand | Cable Matters |
|---|---|
| Model | EZDPI189-40 |
| Type | Speaker Wires |
| Color | Black |
| Connector Number | 3 |
| Connector Detail | DVI to DVI |
| Terminal Gender | Female to Female |
| Specifications | 12VHPWR, EZDIY-FAB, EZDPI189-40, Graphics Cards, NVIDIA RTX 3090Ti, 4070Ti, 4080, 4090, 3.4036 L x 6.096 W x 10.5918 H centimeters, 0.041 kilograms |
| Sports Team | 1 Piece |
| Features | 12VHPWR, Graphics Cards, NVIDIA RTX 3090Ti, 4070Ti, 4080, 4090 |
Questions about this item
How do I confirm the 180° right-angle 12VHPWR adapter is seated correctly after installation?
The 180° right-angle design aligns flush with the GPU's 16-pin 12VHPWR port; full insertion with no visible gap and a firm click indicates proper contact for up to 600W delivery.
What comes in the package and what extra cables are needed?
The pack includes one purple 12VHPWR adapter with a 12+4-pin GPU connector; you must supply a compatible PCIe 5.0 power supply cable with a 12VHPWR plug to connect to the adapter.
Which version should I choose for an RTX 4090 versus an RTX 3090Ti?
Both the RTX 4090 and RTX 3090Ti use the 16-pin 12VHPWR interface, so the single STD-type 600W adapter works for either card; verify the MSI Suprim Liquid X 24G is not your model before buying.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114365BTC
In stock
