WRIARICH
WRIARICH OZHW3 Gigabit Ethernet Splitter 1 to 2 RJ45 USB Powered
USB-powered Gigabit RJ45 splitter turns one Ethernet line into two ports for simultaneous device connections
- TypeEthernet Splitter 1 to 2 RJ45 Network Adapter
- Changer TypeGigabit RJ45 Ethernet Splitter 1 to 2
- SpecificationsImportant Note: This Gigabit RJ45 Ethernet Splitter equipped
- Connector StyleRJ45
- FeaturesExpand your network and add network devices with this 2-port
- Dimensions4.02 x 3.74 x 1.06 inches
- Gigabit speeds up to 1000 Mbps for fast data transfers
- USB powered with 80 cm cable for stable operation
- Splits one RJ45 port into two for expanded connectivity
- Works with Cat5 through Cat8 cables for broad compatibility
- Compact 4.02 x 3.74 x 1.06 inch design fits tight spaces
Network Splitter for Two Wired Devices
The WRIARICH OZHW3 splits one RJ45 Ethernet line into two ports, letting a router or switch serve two computers, a TV and a set-top box, or similar paired devices. It is aimed at homes or small offices where an extra cable run is impractical but two wired connections are needed simultaneously. A USB power cable is included and must be connected for the splitter to operate.
Upgrade from Unpowered Passive Splitters
Unpowered Y-adapters cannot run both ports at gigabit speed; this unit adds active electronics so each port can reach 1000 Mbps instead of falling back to 100 Mbps. The jump is worth it when you transfer large files, stream high-bitrate video or need low latency on both links at the same time. Without USB power the adapter will not function, so a nearby USB port or charger is mandatory.
Check Power Source and Cable Category
Verify you have a free USB-A port or a 5 V USB charger within 80 cm of the intended mounting spot, because the supplied cable is 2.6 ft long and the splitter will not work unpowered. Confirm your existing patch cables are Cat5e or higher — Cat5 will limit throughput — and that the single upstream line from your router or switch is also gigabit-capable. No configuration is required; the device is plug-and-play once powered.
Highlights
- Gigabit speeds up to 1000 Mbps for fast data transfers
- USB powered with 80 cm cable for stable operation
- Splits one RJ45 port into two for expanded connectivity
- Works with Cat5 through Cat8 cables for broad compatibility
- Compact 4.02 x 3.74 x 1.06 inch design fits tight spaces
Specifications
| Brand | WRIARICH |
|---|---|
| Model | OZHW3 |
| Type | Ethernet Splitter 1 to 2 RJ45 Network Adapter |
| Changer Type | Gigabit RJ45 Ethernet Splitter 1 to 2 |
| Specifications | Important Note: This Gigabit RJ45 Ethernet Splitter equipped with a 80cm/2.6 ft USB charging cable, it can support charging(recommended power socket as it is more stable). Cannot be used without power connection. Ethernet Splitter 1 to 2: Ethernet Port Splitter is mainly used to solve the connection problem caused by insufficient wiring, use the USB power supply cable and support two computers to share one ethernet cable simultaneously by means of the physical tapping method. Note: Two Female Port Workable Simultaneously. 1000Mbps Transfer Speed: RJ45 Splitter Adapter 1 to 2 ways dua |
| Connector Style | RJ45 |
| Features | Expand your network and add network devices with this 2-port 1000mbps router/ rj45 network switch splitter, letting you transfer 10 times faster than Fast Ethernet. Two ports offer 2X Ethernet so you can plug and play without missing a beat. 2-port Gigabit Ethernet Splitter: Provides a wired network connection for 2 devices simultaneously by means of one single Ethernet line. 10/100/1000 Mbps speed: Ethernet Lan splitter high speed for efficient performance. Superior Construction for Reliability and Safety: Metal shell, hard and wear-resistant, heat-resistant, flame-resistant; Copper |
| Dimensions | 4.02 x 3.74 x 1.06 inches |
| Weight | 3.2 ounces |
| Package Contents | RJ45 Ethernet Splitter X1 USB Power Cord X1 |
Questions about this item
Does the splitter need a free USB port or power socket to work?
Yes, it must be powered through the included 80 cm USB cable; the unit cannot operate without that connection.
How do I connect the 1‑to‑2 RJ45 adapter so both ports are active at the same time?
Plug the single upstream cable into the one RJ45 port, connect two downstream cables to the two RJ45 ports, then attach the USB power cable to a 5 V source before use.
Will the gold‑plated contacts need cleaning or replacement after extended use?
The gold‑plated RJ45 contacts are designed for long‑term reliability; occasional dust removal with compressed air is sufficient, no scheduled replacement is required.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114814BTC
In stock
