We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black RJ45 splitter with three ports and a short USB power cable

WRIARICH

WRIARICH OZHW2 1-to-3 Gigabit Ethernet Splitter network connector

SKU CH-8V69-0B6PY

Splits one RJ45 port into three gigabit ports and requires USB power to operate

  • TypeEthernet Splitter 1 to 3 RJ45 Network Adapter
  • Changer TypeGigabit RJ45 Ethernet Splitter 1 to 3
  • SpecificationsImportant Note: This Gigabit RJ45 Ethernet Splitter equipped
  • Connector StyleRJ45
  • FeaturesExpand your network and add network devices with this 3-port
  • Dimensions4.02 x 3.74 x 1.06 inches
  • Splits one RJ45 port into three for multi-device connectivity
  • Gigabit 1000 Mbps throughput on each connected cable
  • USB-powered design with 80 cm cable for stable operation
  • Plug-and-play physical connection requires no IP configuration
  • Compact 4.02 × 3.74 × 1.06 in adapter fits tight spaces

WRIARICH OZHW2 1-to-3 Gigabit Splitter

The WRIARICH OZHW2 is a powered RJ45 splitter that turns one Gigabit Ethernet socket into three ports. It suits home or small-office users who need to connect multiple wired devices such as computers, smart TVs or monitors to a single wall outlet without running extra cabling. The device shares the available 1000 megabytes bandwidth across the three ports and does not assign IP addresses. It is not for buyers who need a managed switch with VLAN support or a device that can handle IPTV multicast streams.

Installation and common issues

The unit is plug-and-play once the included 80 centimetre USB power cable is connected to a stable USB power source; it will not operate without external power. Simply insert the incoming Ethernet cable into the single input port and patch up to three devices into the female RJ45 outputs. A frequent mistake is forgetting the USB power connection, which leaves the splitter inactive. Another is expecting each port to deliver full 1000 megabytes simultaneously; the total throughput is shared across all active ports.

Pre-purchase checklist

Verify that you have a free USB port or USB power adapter near the intended location to supply the required power. Confirm that your existing Ethernet cabling is Cat5e or higher to achieve Gigabit speeds. Ensure the single upstream connection comes from a router or switch that hands out IP addresses, because the splitter itself does not perform DHCP. Finally, check that your use case does not rely on IPTV signals, which the manufacturer notes are not supported.

Highlights

  • Splits one RJ45 port into three for multi-device connectivity
  • Gigabit 1000 Mbps throughput on each connected cable
  • USB-powered design with 80 cm cable for stable operation
  • Plug-and-play physical connection requires no IP configuration
  • Compact 4.02 × 3.74 × 1.06 in adapter fits tight spaces

Specifications

BrandWRIARICH
ModelOZHW2
TypeEthernet Splitter 1 to 3 RJ45 Network Adapter
Changer TypeGigabit RJ45 Ethernet Splitter 1 to 3
SpecificationsImportant Note: This Gigabit RJ45 Ethernet Splitter equipped with a 80cm/2.6 ft USB charging cable, it can support charging(recommended power socket as it is more stable). Cannot be used without power connection.
Ethernet Splitter 1 to 3: Ethernet Port Splitter is mainly used to solve the connection problem caused by insufficient wiring, use the USB power supply cable and support two computers to share one ethernet cable simultaneously by means of the physical tapping method. Note: Two Female Port Workable Simultaneously.
1000Mbps Transfer Speed: RJ45 Splitter Adapter 1 to 3 ways dua
Connector StyleRJ45
FeaturesExpand your network and add network devices with this 3-port 1000mbps router/ rj45 network switch splitter, letting you transfer 10 times faster than Fast Ethernet. Three ports offer 2X Ethernet so you can plug and play without missing a beat.
3-port Gigabit Ethernet Splitter:
Provides a wired network connection for 2 devices simultaneously by means of one single Ethernet line.
10/100/1000 Mbps speed:
Ethernet Lan splitter high speed for efficient performance.
Superior Construction for Reliability and Safety:
Metal shell, hard and wear-resistant, heat-resistant, flame-resistant; Copp
Dimensions4.02 x 3.74 x 1.06 inches
Weight3.2 ounces
Package ContentsRJ45 Ethernet Splitter X1
USB Power Cord X1

Questions about this item

How can I confirm the OZHW2 splitter is operating correctly after connecting it?

The unit is powered by the included 80 cm USB cable; once plugged into a stable power socket all three RJ45 ports should show active link lights and each connected device will share a 1000 Mbps Gigabit connection without IP assignment.

What does the OZHW2 package contain and what must I supply separately?

The box includes the 1-to-3 RJ45 splitter and an 80 cm USB power cord; you must provide three Ethernet cables (Cat 5 through Cat 8) and a USB power source such as a wall adapter.

Which version of the WRIARICH splitter should I choose for gigabit speeds on three devices?

The OZHW2 model is the only version listed and delivers 1000 Mbps shared bandwidth across its three RJ45 ports, so select this unit when you need a single gigabit uplink split to three endpoints.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.