WRIARICH
WRIARICH OZF12-2 1×2 HDMI 2.0 video splitter 4K 60 Hz 18 Gbps
Splits one HDMI source to two displays at 4K 60 Hz with 18 Gbps bandwidth and four EDID modes
- TypeHDMI Splitters
- Changer TypeHDMI
- Ports2
- AudioYes
- ColorBlack
- SpecificationsHDMI version:HDMI 2.0 HDMI resolution:up to 3840x2160P/60Hz
- Duplicate one 4K 60 Hz source to two displays simultaneously
- 18 Gbps bandwidth carries 30/36/48 bit deep colour without loss
- HDCP 2.2 support keeps protected content flowing to both screens
- Four EDID modes adapt the signal for wide device compatibility
- Compact 5.59 x 3.15 x 1.26 inch metal enclosure fits tight setups
1×2 HDMI 2.0 Splitter for Dual Displays
The WRIARICH OZF12-2 takes a single HDMI source and duplicates it to two screens simultaneously. It supports video up to 3840 x 2160 at 60 Hz with 18 Gbps bandwidth and deep colour up to 48 bit. Audio formats including DTS-HD and Dolby TrueHD pass through without loss. The unit is powered by an included AC adaptor and ships in a compact black enclosure.
Replaces Basic Switches and Single-Output Cables
A simple cable or passive switch only serves one display at a time, forcing users to swap leads or settle for a single screen. This splitter removes that limitation by feeding identical content to two HDMI inputs at once, which is useful for digital signage, dual-monitor mirroring or sending the same signal to a projector and a TV. The jump is worth it when simultaneous duplicate output is required rather than manual switching.
Stable Output Under Continuous Operation
The HDMI 2.0b chipset maintains the full 18 Gbps data rate during extended sessions without signal degradation or handshake drops. HDCP 2.2 compliance stays active throughout playback of protected 4K material, and the four EDID modes keep the source locked to a stable timing table. Heat remains low in the small chassis, so the splitter runs continuously in installed environments without throttling or intermittent blanking.
Highlights
- Duplicate one 4K 60 Hz source to two displays simultaneously
- 18 Gbps bandwidth carries 30/36/48 bit deep colour without loss
- HDCP 2.2 support keeps protected content flowing to both screens
- Four EDID modes adapt the signal for wide device compatibility
- Compact 5.59 x 3.15 x 1.26 inch metal enclosure fits tight setups
Specifications
| Brand | WRIARICH |
|---|---|
| Series | OZF12-2 |
| Model | OZF12-2 |
| Part Number | OZF12-2 |
| Type | HDMI Splitters |
| Changer Type | HDMI |
| Ports | 2 |
| Audio | Yes |
| Color | Black |
| Specifications | HDMI version:HDMI 2.0 HDMI resolution:up to 3840x2160P/60Hz Support video color format:30/36/48 bit deep color Support audio format:DTS-HD/Dolby-trueHD/DTS/Dolby-AC3/DSD HD(HBR) Max bandwidth:1536MHz Max baud rate:18Gbps Input cable distance:<5m AWG26 HDMI standard cable Output cable distance:<5m AWG26 HDMI standard cable Max working current:1200mA Power Adapter Format:output: DC5V/1A Dimension :58x49x11mm Weight:130g 4K HDMI Splitter 1x2 2160P 60HZ HDMI2. |
| Input Connector | 1 HDMI input |
| Output Connector | 2 HDMI |
| Maximum Resolutions | 3840 x 2160 |
| Bandwidth | 18Gbps |
| Features | HDMI Splitter 1x2: 4k 1x2 HDMI Splitter distributes 1 HDMI source duplicate to 2 different HDMI displays simultaneously. Transfer impressive and high-definition video and audio without loss and delay. (Duplicate input signal only, NOT support Extend) High-grade Configuration: The 4K HDMI splitter supports HDCP2.2, HDMI2.0b, EDID, 3D, RGB 4:4:4, Ultra HD Max Resolution 3840*2160 4k@60Hz. The most high-grade configuration gives you the most extreme enjoyment. It support doby vision, but it requires your display device support doby vision, too. Wide Compability: This 4k HDMI splitter 1 |
| Dimensions | 5.59 x 3.15 x 1.26 inches |
| Weight | 3.2 ounces |
| Package Quantity | 1 |
| Package Contents | 1.1x2 HDMI 2.0 Splitter HDCP 2.2 x1 2.AC Power Adaptor x1 3.User Manual x1 |
Questions about this item
What size space does the 5.59 x 3.15 x 1.26 inch splitter need?
The unit measures 5.59 by 3.15 by 1.26 inches and weighs 3.2 ounces, so it fits on a desk or behind a display without brackets.
How do I power the splitter and which EDID mode should I pick?
Connect the included AC power adaptor, then use the EDID switch to match the least-capable display; the wrong setting can limit both outputs to a lower resolution.
Will the AC power adaptor need replacing over time?
The splitter ships with an external AC adaptor; if it fails, a replacement with the same voltage and polarity will restore operation.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114354BTC
In stock
