We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

WRIARICH

WRIARICH Ethernet Splitter 1 to 4 1000Mbps USB Powered

SKU CH-NAGK-0TFPP

Splits one Ethernet line into four gigabit ports with USB power and LED status indicators

  • Expands one Ethernet line to four devices
  • Up to 1000Mbps transmission speed per connection
  • Works with Cat5 through Cat8 cables
  • USB powered with plug-and-play setup
  • LED indicators show power and data status

One-to-Four Gigabit Splitter

This WRIARICH adapter divides a single Ethernet cable into four RJ45 ports so four devices can share one wired connection simultaneously. It accepts Cat5 through Cat8 cables and works with routers, switches, TVs and set-top boxes. A USB power cable is required for operation and no drivers are needed.

Sustained 1000Mbps Throughput

Each of the four ports can maintain up to 1000Mbps data rates during continuous use without signal interference between cable groups. The aluminum alloy housing and built-in PCB provide stable transmission over distances up to 100 meters. LED indicators on every port display real-time power and link status.

USB Power Dependency

The splitter cannot function without an active USB power source, so a nearby USB port or charger is mandatory for any deployment. Buyers who cannot supply constant USB power at the installation point should consider a passive alternative or a powered switch instead.

Highlights

  • Expands one Ethernet line to four devices
  • Up to 1000Mbps transmission speed per connection
  • Works with Cat5 through Cat8 cables
  • USB powered with plug-and-play setup
  • LED indicators show power and data status

Specifications

BrandTendak

Questions about this item

How much power does the USB-powered splitter draw when all four ports are active?

The adapter draws power from a standard USB port and the manufacturer highlights stable 1000Mbps transmission across all four ports simultaneously, indicating the USB supply is sufficient for full load.

What cable categories must I already have for the splitter to work at gigabit speeds?

You need Cat5e, Cat6, Cat7 or Cat8 Ethernet cables; the splitter’s RJ45 jacks are compatible with all those categories and support up to 100 metre runs.

Can I connect this splitter to my older 100Mbps switch and still get gigabit links to the four devices?

The splitter itself passes 1000Mbps signals, but the overall speed will be limited to the slowest link in the chain, so a 100Mbps switch will cap traffic at 100Mbps.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.