We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with 24-pin ATX and 4-pin Molex connectors

WRIARICH

WRIARICH Dual PSU Adapter 24-pin ATX 4-pin Molex power splitter cord

SKU CH-5B4T-DAK02

Connects a primary 4-pin Molex and secondary 24-pin ATX supply to start both units simultaneously

  • Length< 1"
  • Specifications1.8 L x 6.1 W x 10.9 H centimeters, Optimal Shop, 0.018 kilo
  • FeaturesClassic
  • Adds second PSU without wiring changes using 24-pin ATX and 4-pin Molex connectors
  • Slim 7.00 x 3.00 cm board with mounting holes fits tight chassis spaces
  • Solid-state PCB distributes load without generating extra heat
  • Plug-and-play design powers GPUs, drives and fans from dual supplies
  • Secondary PSU starts automatically when primary supply turns on

Dual PSU adapter for mining rigs

The WRIARICH adapter connects a primary PSU via a 4-pin Molex lead and a secondary PSU via a 24-pin ATX lead. When the primary unit powers on, the board switches the second supply on automatically. It is aimed at builders who need extra wattage for multiple graphics cards or drives without rewiring the case.

Check primary PSU for spare Molex lead

Verify that your main power supply has an unused 4-pin Molex connector to feed the adapter’s trigger circuit. The secondary supply must provide a standard 24-pin ATX plug. No soldering or wire cutting is required, but both units must be ATX-compatible and able to share a common ground through the board.

Passive board runs cool and silent

The solid-state PCB generates no measurable heat and has no moving parts, so it adds zero noise to the system. Its slim profile measures 7.00 by 3.00 centimetres with pre-drilled mounting holes for flexible placement. Power draw is limited to the logic circuit that bridges the two PSU-on signals.

Highlights

  • Adds second PSU without wiring changes using 24-pin ATX and 4-pin Molex connectors
  • Slim 7.00 x 3.00 cm board with mounting holes fits tight chassis spaces
  • Solid-state PCB distributes load without generating extra heat
  • Plug-and-play design powers GPUs, drives and fans from dual supplies
  • Secondary PSU starts automatically when primary supply turns on

Specifications

BrandCable Matters
ModelOptimal Shop
Length< 1"
Specifications1.8 L x 6.1 W x 10.9 H centimeters, Optimal Shop, 0.018 kilograms, false, 39121400, Classic
FeaturesClassic

Questions about this item

What connectors come on the adapter and do I need any extra cables to link two PSUs?

The adapter has a 24-pin ATX socket and a 4-pin Molex plug; you only need a spare Molex lead from your primary PSU and the 24-pin cable from the secondary PSU.

The specs list several centimetre measurements — which ones describe the board itself?

The board measures 7.00 cm long by 3.00 cm wide (2.76" × 1.18").

When I press the case power button, will both supplies start together?

Yes — when the primary PSU receives the power-on signal, the adapter passes it to the secondary 24-pin connector so both units turn on simultaneously.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.