We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 10 ft DisplayPort to HDMI cable with gold-plated male connectors

WRIARICH

WRIARICH DP-101 DisplayPort to HDMI cable 10 ft 4K 30Hz

SKU CH-W00D-M0KN8

Connects a DisplayPort source to an HDMI display at 4K 30 Hz over a 10 ft gold-plated, double-shielded copper cable

  • ColorBlack
  • Length10 ft.
  • Cable Length10 ft.
  • Connector Number1
  • Connect From1 x DisplayPort
  • Connect To1 x HDMI
  • Connects DisplayPort sources to HDMI displays via male-to-male gold-plated connectors
  • Delivers 4K UHD video at 30 Hz with 2.25 Gbps bandwidth
  • Transmits audio alongside video without separate cables
  • Works instantly with plug-and-play, no drivers or software needed
  • Built with solid copper conductors and double shielding for reliable signal integrity

WRIARICH DP-101 10 ft DisplayPort to HDMI Cable

The WRIARICH DP-101 is a male-to-male cable that connects a DisplayPort source to an HDMI display. It suits desktop users linking a GPU to a monitor, projector or HDTV without an adapter. The 10 ft length covers typical desk-to-screen distances. It is not for setups requiring a DisplayPort input on the display side.

4K at 30 Hz and 2.25 Gbps bandwidth ceiling

The cable carries 4K resolution at 30 Hz with a 2.25 Gbps bandwidth limit. Higher refresh rates or deeper colour depths at 4K exceed this interface capacity. The link is unidirectional from DisplayPort output to HDMI input. It cannot drive a DisplayPort monitor from an HDMI source.

Double-shielded solid copper

Double shielding and a solid copper conductor protect signal integrity over the full run. Gold-plated terminals resist oxidation for reliable contact through repeated mating. The plug-and-play design needs no driver installation on Windows or Linux. The fixed 10 ft length cannot be shortened or extended without signal loss.

Highlights

  • Connects DisplayPort sources to HDMI displays via male-to-male gold-plated connectors
  • Delivers 4K UHD video at 30 Hz with 2.25 Gbps bandwidth
  • Transmits audio alongside video without separate cables
  • Works instantly with plug-and-play, no drivers or software needed
  • Built with solid copper conductors and double shielding for reliable signal integrity

Specifications

BrandWRIARICH
ModelDP-101
ColorBlack
Length10 ft.
Cable Length10 ft.
Connector Number1
Connect From1 x DisplayPort
Connect To1 x HDMI
Terminal GenderMale to Male
SpeedTest
ShieldingDouble-shielded
ConductorSolid Copper Conductor
Constructiontest123
Sound QualityProduction Test

Questions about this item

Should I pick the DP-101 or a different length for my setup?

The DP-101 is offered in a 10 ft length; choose it when the source and display are up to that distance apart, otherwise select a shorter or longer cable to match your exact run.

What does the 4K 30 Hz rating mean once the cable is connected?

It means the link can transport a 4K picture at up to 30 frames per second, suitable for video playback, office work and static images.

What DisplayPort version does the cable use and what bandwidth limit applies?

The cable is built to a 2.25 Gbps bandwidth specification with gold-plated male-to-male connectors and double shielding for reliable plug-and-play operation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.