WRIARICH DisplayPort to HDMI cable 1.8m 4K 30Hz braided

Unidirectional DP-to-HDMI 4K 30 Hz cable

This 1.8 m DisplayPort to HDMI cable carries 4K UHD at 30 Hz and 1080p at higher refresh rates from a DP source to an HDMI display. It is a male-to-male cord built for one-way signal flow only, so it will not work if you try to drive a DisplayPort monitor from an HDMI output. The gold-plated connectors and tinned copper conductors keep the 18 Gbps link stable for video and audio streaming or desktop extension.

Practical bandwidth and direction limits

The cable supports 4K at 30 Hz and 1080p resolution, but it cannot deliver 4K at 60 Hz or higher because the 18 Gbps ceiling is fixed by the copper construction. It is strictly unidirectional — DisplayPort source to HDMI sink — so buyers who need the reverse direction or an active conversion for longer runs must choose a different product. Audio and video pass together, yet HDR metadata or deep-colour modes beyond the rated bandwidth are not guaranteed.

Simple plug-and-play install with strain relief

No drivers or external power are required; connect the DP end to the computer and the HDMI end to the monitor, projector or TV, then select mirror or extend mode in the OS. The nylon braid and aluminium shells survive 15000 bend cycles, protecting the vulnerable joint where most cheap cables fail. The only common mistake is reversing the ends, which produces no signal because the cable lacks an HDMI-to-DP conversion chip.