We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black sleeved CPU 8-pin splitter cable with one female and two detachable male connectors 9.5-inch length

WRIARICH

WRIARICH CPU 8 Pin Splitter 9.5-inch 24cm Power Splitter Cord

SKU CH-QGN3-S5EB4

Splits one CPU 8-pin PSU connector into two detachable 4+4 male ends for motherboards needing dual EPS 12V power

  • TypeSpeaker Wires
  • ColorBlack
  • Connector DetailDVI to DVI
  • Terminal GenderFemale to Female
  • SpecificationsBlack, 0.05 kilograms
  • FeaturesBlack
  • Powers dual CPU sockets from one PSU connector
  • Detachable 4+4 pins fit 4-pin or 8-pin EPS ports
  • 24 cm length keeps cable routing tidy
  • 18 AWG tin-coated copper handles high current safely
  • Includes self-adhesive tape for secure cable management

CPU 8 Pin Splitter for Dual EPS Ports

This 9.5-inch adapter converts a single PSU 8-pin output into two detachable 4+4 pin male connectors for motherboards that require dual CPU 8 pin or 8+4 pin ATX EPS 12V power. It uses 1007-18AWG tin-coated copper wire and includes a self-adhesive tape strip for cable management. The female end plugs into the power supply while the male ends feed the motherboard sockets. It is designed solely for motherboard EPS 12V connections.

Detachable 4+4 Pin Ends Add Flexibility

Each male connector splits into a 4+4 configuration so it can serve as either an 8-pin EPS or a 4-pin ATX 12V plug by sliding the extra four pins on or off. This lets the single splitter satisfy boards with 8 pin, 8+4 pin or 8+8 pin layouts without needing multiple cables. The 24 cm length keeps routing tidy inside compact builds while the sleeved jacket protects the 18 AWG conductors.

Verify Motherboard EPS Ports Before Buying

Confirm your motherboard uses ATX 12V 4 pin, 8 pin, 8+4 pin or 8+8 pin EPS 12V headers because this cable will not work with GPU PCIe power connectors and can be damaged if misused. Check that your power supply provides a standard CPU 8 pin female output to accept the splitter’s input connector. The bundle includes one splitter cable and one adhesive tape piece.

Highlights

  • Powers dual CPU sockets from one PSU connector
  • Detachable 4+4 pins fit 4-pin or 8-pin EPS ports
  • 24 cm length keeps cable routing tidy
  • 18 AWG tin-coated copper handles high current safely
  • Includes self-adhesive tape for secure cable management

Specifications

BrandCable Matters
ModelCOMeap Model 8 Pin Splitter
TypeSpeaker Wires
ColorBlack
Connector DetailDVI to DVI
Terminal GenderFemale to Female
SpecificationsBlack, 0.05 kilograms
FeaturesBlack
Disclaimernot_applicable

Questions about this item

Will the 18AWG copper conductors need replacing after continuous 24/7 operation?

The 18AWG tin-coated copper wire is rated for continuous use and does not have a scheduled replacement interval.

What is the maximum current the 18AWG gauge can carry before voltage drop becomes an issue on the 24 cm length?

At 24 cm the 18AWG conductors keep voltage drop minimal for typical EPS 12V loads up to the connector rating.

Does the sleeved 9.5-inch cable run warm or add audible noise when the system is under full load all day?

The cable is passive with no moving parts, so it produces no noise and runs at ambient temperature under normal EPS 12V loads.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.