We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

WRIARICH

WRIARICH 3-Port HDMI Switch 8K@60Hz 4K@120Hz 48Gbps Remote

SKU CH-ER3G-A6V6N

A 3-port HDMI 2.1 switch routes 8K at 60 Hz or 4K at 120 Hz with 48 Gbps bandwidth and includes an IR remote effective to 15 ft

  • TypeHDMI Switchers
  • Changer TypeHDMI Switch/Extender
  • ColorBlack
  • Ports3
  • Switch three sources with one remote from 15 ft away
  • Enjoy 4K gaming at 120 Hz with HDR detail
  • Supports 8K resolution at 60 Hz for future-proof viewing
  • 48 Gbps bandwidth carries uncompressed audio and video
  • Manual button on the unit gives instant local control

3-Port 8K HDMI Switch for Multi-Source Setups

This new WRIARICH HDMI switch connects three source devices to one display. It supports 8K resolution at 60 Hz and 4K at 120 Hz for gaming consoles, streaming sticks, Blu-ray players and computers. The unit includes an IR remote and a manual button for input selection.

Sustained 48 Gbps Bandwidth With IR Control

The switch maintains a full 48 Gbps data rate for continuous high-bitrate video and audio streams. Switching between inputs takes roughly one to two seconds. The IR remote works reliably up to 15 ft, allowing comfortable control from a sofa or bed without line-of-sight constraints.

Verify HDMI 2.1 Cables and Device Compatibility

Before ordering, confirm that every source, the display and all cables support the HDMI 2.1 specification. The manufacturer notes that a 3.3 ft cable for inputs and a 5 ft cable for the output give the best results. Devices limited to older HDMI versions will not pass 8K or 4K 120 Hz signals.

Highlights

  • Switch three sources with one remote from 15 ft away
  • Enjoy 4K gaming at 120 Hz with HDR detail
  • Supports 8K resolution at 60 Hz for future-proof viewing
  • 48 Gbps bandwidth carries uncompressed audio and video
  • Manual button on the unit gives instant local control

Specifications

TypeHDMI Switchers
Changer TypeHDMI Switch/Extender
ColorBlack
Ports3

Questions about this item

Does the switch generate noticeable heat or noise when left on all day?

The unit is a passive HDMI 2.1 switch with no fan, so it runs silently and produces minimal heat during continuous use.

What cables and source devices must I already have for the 48 Gbps link to work?

You need HDMI 2.1 cables — ideally 3.3 ft for each input and 5 ft for the output — plus source devices and a display that all support HDMI 2.1 and the desired 8K@60 Hz or 4K@120 Hz modes.

Will my older 4K@60 Hz monitor and legacy consoles work through this switch without downscaling the newer gear?

Yes, the switch passes each signal natively; a 4K@60 Hz screen or older console will operate at its own maximum rate while newer 8K or 4K@120 Hz sources run at full speed on the same 48 Gbps pathway.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.