WRIARICH
WRIARICH 20220406 Analog Audio Extender RCA 3.5mm over Cat5e/6/7 1475ft POC
Extends stereo audio up to 1475 ft over a single Cat5e/6/7 cable using one power adapter
- TypeRCA/3.5mm up to 1475FT, Audio Extender
- Changer Typetype
- SpecificationsAudio Extender, 68 L x 58 W x 23.5 H millimeters, 2, 12 volt
- Connector BAudio Extender
- Cable Jakcet TypePlastic
- Connector StyleMale
- Extend analog audio up to 1475 ft over Cat5e/6/7
- Transmit RCA or 3.5 mm stereo without noise via ADC
- Power both units from one 12 V adapter using POC
- Compact 68 × 58 × 23.5 mm tabletop design
- Plug-and-play with no driver installation required
Analog Audio Extender over Cat5e/6/7
The WRIARICH 20220406 transmits analog stereo audio from RCA or 3.5 mm sources up to 1475 ft over a single Cat5e, Cat6 or Cat7 cable. It uses ADC technology to convert the signal for differential digital transmission, reducing interference and noise over long runs. Power-over-cable design lets a single 12 V adapter supply both the transmitter and receiver units. No driver installation is required for operation.
Maximum distance depends on cable category
The extender reaches the full 1475 ft only when a Cat6 cable wired to the 568B standard is used; Cat5e or Cat7 may not achieve that length. The transmitter accepts either RCA L/R or a 3.5 mm input, but can send only one source at a time, while the receiver outputs both simultaneously. Units measure 68 × 58 × 23.5 mm each and include LEDs to confirm link status.
Suits installers running audio to a remote zone
Ideal for whole-home audio, projector setups or commercial AV where the source and amplifier are far apart. Not for users who need to switch between multiple sources at the transmitter, or who require digital optical or coaxial input formats. Buyers without access to structured Cat6 cabling terminated to 568B should look at alternative extension methods.
Highlights
- Extend analog audio up to 1475 ft over Cat5e/6/7
- Transmit RCA or 3.5 mm stereo without noise via ADC
- Power both units from one 12 V adapter using POC
- Compact 68 × 58 × 23.5 mm tabletop design
- Plug-and-play with no driver installation required
Specifications
| Brand | RCA |
|---|---|
| Series | 20220406 |
| Model | 20220406 |
| Part Number | 20220406 |
| Type | RCA/3.5mm up to 1475FT, Audio Extender |
| Changer Type | type |
| Specifications | Audio Extender, 68 L x 58 W x 23.5 H millimeters, 2, 12 volts, Tabletop, Plastic, 20220406 |
| Connector B | Audio Extender |
| Cable Jakcet Type | Plastic |
| Connector Style | Male |
| Features | Audio Extender |
| Dimensions | 14.33in W x 12.83in H x 9.06in D |
| Package Quantity | 1 |
| Package Contents | power adapter |
| Disclaimer | not_applicable |
Questions about this item
How far will the 1475 ft Cat6 reach actually carry stereo audio in my rack?
The extender sends analog RCA or 3.5 mm stereo up to 1475 ft over a single Cat5e/6/7 cable; Cat6 with 568B wiring is recommended for best signal integrity.
Does the single 12 V adapter power both the transmitter and receiver units?
Yes, the 12 V 1 A adapter powers either the transmitter or the receiver through the Cat cable using POC technology, so only one outlet is needed.
What physical space do the 68 x 58 x 23.5 mm units need on a shelf?
Each unit measures 68 mm long, 58 mm wide and 23.5 mm high, fitting on a standard tabletop or rack shelf.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115656BTC
In stock
