We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 12VHPWR 12+4 pin 90-degree RVS angled power adapter

WRIARICH

WRIARICH 12VHPWR 12+4 Pin 90 Degree RVS Power Adapter

SKU CH-81KF-Z4YDG

90-degree RVS adapter routes a 12VHPWR cable close to the card so the side panel clears with at least 26 mm of space

  • Type9 V
  • Changer TypeUSB C Charger
  • Specifications12VHPWR, 1, no_plug, PC
  • Connector A12VHPWR
  • Connector B12VHPWR
  • Connector PlatingMetallic
  • Strengthened PCB avoids cable bending and thermal risk
  • Fits cases with 26 mm clearance for side-panel closure
  • Alloy copper terminals ensure stable 600 W delivery
  • Aluminium heatsink with vents maintains cool operation
  • 90-degree RVS orientation suits larger builds and routing

Angled 12VHPWR Adapter

The WRIARICH 12VHPWR 12+4 pin adapter provides a 90-degree RVS connection between a power cable and a graphics card. It uses a strengthened PCB design to avoid wire bending and maintains full terminal contact. An aluminium heat sink and ventilation holes support stable operation. The unit weighs 0.07 kilograms and comes in a single black package.

Clearance Solution for Tight Builds

This adapter suits builders whose side panel will not close because the power cable protrudes too far. The manufacturer notes a required clearance of more than 26 millimetres between the side plate and the graphics card. It is not intended for 4090, 5080 or 5090 models, so buyers with those cards must choose a different solution. The 180-degree variant exists for even tighter spaces.

600-Watt Current Rating

The single specification that determines compatibility is the 600-watt output support. High-quality alloy copper terminals deliver conductivity and stability under sustained high-current loads. Verify that the power supply and cable assembly are rated for this level before installation.

Highlights

  • Strengthened PCB avoids cable bending and thermal risk
  • Fits cases with 26 mm clearance for side-panel closure
  • Alloy copper terminals ensure stable 600 W delivery
  • Aluminium heatsink with vents maintains cool operation
  • 90-degree RVS orientation suits larger builds and routing

Specifications

BrandDell
SeriesEZDPI189-10
ModelEZDPI189-10
Part NumberEZDPI189-10
Type9 V
Changer TypeUSB C Charger
Specifications12VHPWR, 1, no_plug, PC
Connector A12VHPWR
Connector B12VHPWR
Connector PlatingMetallic
Connector StyleMale
Features12VHPWR, 1, no_plug, PC
Weight0.07 kilograms
Package Quantity1
Package Contents1 Count
Disclaimernot_applicable

Questions about this item

Does the 12VHPWR 12+4 pin interface on this adapter support the full 600 W rating?

Yes, the adapter is rated for 600 W output and uses alloy copper terminals with an aluminium heat sink and ventilation holes to maintain stable high-current operation.

What clearance is required between the graphics card and the side panel for the 90-degree RVS connector to fit?

You need more than 26 mm of space between the side plate and the graphics card for the 90-degree RVS adapter to install cleanly.

How do I install the adapter without bending the power cable, and what is the common mistake?

Plug the adapter directly into the card's 12VHPWR socket, then attach your power cable to the adapter; the strengthened PCB handles the angle so you must not force or bend the cable itself.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.