We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black RJ45 splitter box with two female ports and a short USB power lead

WRIARICH

WRIARICH 1 to 2 Port RJ45 Network Ethernet Adapter Splitter with USB Power Cable

SKU CH-3X4P-Z1Z7E

Splits one RJ45 port into two female sockets for Cat5 to Cat7 cables and includes a USB power cable

  • Type1 to 2 RJ45 Network Splitter Adapter
  • Package Contents1 X RJ45 Network Splitter Adapter
  • Connect two devices simultaneously using one Ethernet port via 1-to-2 RJ45 splitter
  • Extend network reach up to 30 metres with integrated 0.8 metre cable
  • Compatible with Cat5 through Cat7 shielded cables for broad usability
  • Compact 4 cm by 3.5 cm by 2.1 cm design fits tight spaces
  • USB powered at 3.3 volts for reliable splitter operation

Compact RJ45 Splitter with USB Power

The WRIARICH adapter turns a single Ethernet socket into two female RJ45 ports so two devices can share one wall jack or patch-panel drop. It accepts Cat 5, Cat 5e, Cat 6 and Cat 7 cables and draws 3.3 V from the included USB power cable. Home-office users and small-business installers can add a second wired connection without pulling new cable.

Shielded Build and Flexible Lead

A metal-shielded housing measuring 4 cm by 3.5 cm by 2.1 cm resists electromagnetic interference on busy network runs. The fixed 0.8 metre lead lets the splitter sit on a desk or tuck behind equipment while the USB plug reaches a nearby charger or PC port. Both RJ45 jacks are 8P8C wired so each linked device sees a standard Ethernet connection.

Check Cabling and Power Before Buying

Verify that the existing cable run uses eight-conductor Cat 5 or better wiring; four-wire cables will not support two active ports. Ensure a USB-A socket or charger is available within 2.62 ft of the intended splitter location to supply the required 3.3 V. This device does not combine two upstream links into one faster pipe — it only splits one link for shared access.

Highlights

  • Connect two devices simultaneously using one Ethernet port via 1-to-2 RJ45 splitter
  • Extend network reach up to 30 metres with integrated 0.8 metre cable
  • Compatible with Cat5 through Cat7 shielded cables for broad usability
  • Compact 4 cm by 3.5 cm by 2.1 cm design fits tight spaces
  • USB powered at 3.3 volts for reliable splitter operation

Specifications

Type1 to 2 RJ45 Network Splitter Adapter
Package Contents1 X RJ45 Network Splitter Adapter

Questions about this item

What Ethernet standard does the RJ45 splitter support and what speed does it cap at?

The adapter accepts Cat 5, Cat 5e, Cat 6 and Cat 7 cables with 8P8C plugs. It passes through the cable rating, so the practical limit is the lowest category in the chain.

What are the physical dimensions and cable length needed to fit this splitter?

The splitter body measures 4 cm by 3.5 cm by 2.1 cm and includes a .8 metre USB power lead. Allow space for two RJ45 cables and the USB connector at the mounting point.

How is the splitter installed and which step is often missed?

Connect the incoming Ethernet cable to the single female port, plug two outgoing cables into the dual female ports, then attach the USB cable to a 3.3 V power source. The step often missed is powering the USB lead before expecting both output ports to work.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.