We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 30cm ATX splitter cable with one 24-pin male and two 20+4-pin female connectors

WMtec

WMtec ATX 24 Pin 20+4 Pin Dual PSU Splitter Extension Cable 30cm

SKU CH-AC0S-ANXN3

Splits one motherboard 24-pin connector between two power supplies with 30cm cables

  • Powers a motherboard from two PSUs using a single 24-pin connector
  • Adds extra wattage for mining or gaming without replacing the original unit
  • 30 cm cable keeps dual-PSU wiring tidy inside the case
  • 20+4 pin female ends fit both 20-pin and 24-pin power supplies
  • Synchronised on/off control starts both supplies together from the motherboard

Dual PSU Splitter for Mining and Gaming

This 30cm ATX cable connects two power supplies to one motherboard through a 24-pin male plug and two 24-pin female sockets. It targets builders who need extra wattage for mining rigs or dual-PSU gaming systems without replacing an existing unit. The splitter turns both supplies on and off simultaneously.

Simple 24-pin connections with polarity warning

Installation is a matter of aligning the 20+4 pin connectors and pressing them straight into the motherboard and PSU sockets. The supplier warns against reversing the plugs or forcing them at an angle, as mis-insertion can damage pins or burn equipment. Hold the socket housing while inserting to avoid excessive force on the pins.

Combines two supplies for higher total power

The cable lets a system draw from both units at once, giving headroom for power-hungry GPUs or large drive arrays. The note specifies that the 24-pin supply should feed the motherboard only, while the second supply handles drives and peripherals; mixing the two sources on the same rail is not supported.

Highlights

  • Powers a motherboard from two PSUs using a single 24-pin connector
  • Adds extra wattage for mining or gaming without replacing the original unit
  • 30 cm cable keeps dual-PSU wiring tidy inside the case
  • 20+4 pin female ends fit both 20-pin and 24-pin power supplies
  • Synchronised on/off control starts both supplies together from the motherboard

Specifications

No published specifications for this item yet.

Questions about this item

How do I confirm the dual PSU splitter is working after connecting both power supplies to the motherboard?

Both power supplies should start simultaneously when the system power button is pressed and the motherboard receives power through the 24-pin male connector.

What connectors and cables are included with the 30cm ATX dual PSU splitter?

The cable provides one 24-pin male connector for the motherboard and two 24-pin female connectors for the power supplies; no additional cables are included.

Which version of the splitter should I choose for a standard ATX motherboard and two ATX power supplies?

The 24-pin to dual 24-pin version with 30cm length is the only configuration offered and matches standard ATX motherboards and PSUs.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.