We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small metal box with four F-type ports on one side

Wilson Electronics, Inc.

Wilson Electronics, Inc. 850036 4-Way Video Splitter 75 Ohm 698-700 MHz 2.70 GHz

SKU CH-9GHA-8J32Q MPN 850036

A 75 ohm RF splitter divides a 698-700 MHz cellular signal four ways with low insertion loss up to 2.70 GHz

  • TypeRF Splitters
  • Changer TypeRF Splitter
  • Bandwidth2.70 GHz
  • Splits signal to four antennas with minimal loss
  • 75 ohm impedance matches standard coaxial systems
  • Covers 698 to 700 MHz cellular band
  • 70 GHz bandwidth supports wideband distribution
  • Low insertion loss preserves amplified signal strength

75 Ohm 4-Way RF Splitter

The Wilson 850036 divides a single RF feed into four equal paths for cellular signal distribution systems. It operates across the 698-700 MHz and 2.70 GHz bands with 75 ohm impedance. Low insertion loss and high isolation preserve signal quality to each connected antenna.

Installers needing four-output signal division

This splitter suits projects that require one amplified source to feed multiple similarly sized coverage areas. It is not intended for applications needing unequal power splits, different connector types, or operation outside the stated frequency ranges.

75 ohm impedance specification

The 75 ohm characteristic impedance determines compatibility with the coaxial cables and antennas in a cellular booster system. Mismatched impedance increases reflection and degrades coverage, so verifying this value against the rest of the installation is the decisive step.

Highlights

  • Splits signal to four antennas with minimal loss
  • 75 ohm impedance matches standard coaxial systems
  • Covers 698 to 700 MHz cellular band
  • 70 GHz bandwidth supports wideband distribution
  • Low insertion loss preserves amplified signal strength

Specifications

BrandWilson
TypeRF Splitters
Changer TypeRF Splitter
Bandwidth2.70 GHz
Shipping weight0.45 kg
Package size127 × 127 × 25 mm

Questions about this item

What coaxial cables and F-type connectors do I need to connect this 4-way splitter?

You need 75 ohm coaxial cables with F-type connectors on both ends — one for the input from your booster or distribution hub and one for each of the four outputs to your antennas.

Will this splitter pass signals from my existing 698 MHz to 700 MHz cellular equipment?

Yes, its rated bandwidth covers 698 MHz to 2.70 GHz, so it passes the full 698–700 MHz cellular band along with higher-frequency services.

How can I confirm the splitter is dividing the signal evenly after installation?

Measure the signal level at each of the four output ports with a spectrum analyser or signal meter; each port should read roughly the same level, reflecting the specified –3 dB split.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.