We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 50mm PCIe 3.0 x16 riser cable with left-angled 90-degree female connector and rigid PCB

Wilfly

Wilfly PCIe 3.0 x16 Extender Riser Cable 50mm Left Angled

SKU CH-3QHH-AV6EZ

50 mm PCIe 3.0 x16 riser cable with a 90-degree left-angled female connector for vertical GPU mounting in 1U–2U chassis

  • TypeInternal Power Cables
  • ColorBlack
  • Cable Length1.97in / 50mm
  • Connector A1 x PCI Express 3.0 x16 female 90-Degree Left Angled (to Add
  • Connector B1 x PCI Express 3.0 x16 male (to M/B PCIe Slot)
  • Connector Number2
  • 50 mm cable fits tight 1U and 2U chassis
  • Left-angled 90° connector clears adjacent components
  • PCIe 3.0 x16 link supports full 16 GB/s bandwidth
  • EMI-shielded flexible design minimises signal degradation
  • Rigid PCB with standoffs secures GPU vertically

Vertical GPU mounting

This 50mm PCIe 3.0 x16 extender riser cable enables vertical graphics-card installation in 1U or 2U IPC chassis and compact gaming cases. The left-angled 90-degree female connector routes the card parallel to the motherboard, clearing tight side-panel clearances. EMI shielding and a rigid PCB with standoffs protect signal integrity at full 3.0 16GB throughput.

Build integration

The male end plugs directly into the motherboard PCIe x16 slot while the female end accepts any standard add-in card. No external power adapter is required because the cable draws bus power only. The 1.97in length leaves minimal slack, so the assembly suits space-constrained builds that cannot accommodate longer risers or right-angled alternatives.

Thermals and power

Passive construction adds no active cooling or acoustic load to the system. Power consumption is limited to the PCIe slot specification, imposing no extra demand on the PSU. The shielded flexible cable resists EMI-induced errors without generating measurable heat under normal GPU workloads.

Highlights

  • 50 mm cable fits tight 1U and 2U chassis
  • Left-angled 90° connector clears adjacent components
  • PCIe 3.0 x16 link supports full 16 GB/s bandwidth
  • EMI-shielded flexible design minimises signal degradation
  • Rigid PCB with standoffs secures GPU vertically

Specifications

TypeInternal Power Cables
ColorBlack
Cable Length1.97in / 50mm
Connector A1 x PCI Express 3.0 x16 female 90-Degree Left Angled (to Add-in PCIe Card)
Connector B1 x PCI Express 3.0 x16 male (to M/B PCIe Slot)
Connector Number2

Questions about this item

Does the 50 mm length limit which chassis I can use it in?

The 50 mm cable is designed for vertical mounting in 1U to 2U IPC, gaming and GPU chassis where the graphics card sits close to the motherboard slot.

Will the EMI shielding keep the cable cool and quiet during all-day operation?

The flexible EMI shield reduces signal disturbance; the cable itself has no active cooling or moving parts so it adds no noise and negligible heat.

My motherboard only has a standard horizontal PCIe x16 slot — will the left-angled connector still mate correctly?

Yes, the male PCIe 3.0 x16 connector plugs straight into a standard horizontal slot; the 90-degree left-angled female end then routes the card parallel to the board.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.