We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Wilfly

Wilfly PCI-E 3.0 x16 Extender Riser Cable 300mm Left Angled

SKU CH-GRK7-ZYFA8

A 300 mm PCI-E 3.0 x16 extender with a 90-degree left-angled female connector, EMI shielding, and rigid PCB for vertical GPU mounting without speed loss beyond 200 mm

  • TypeInternal Power Cables
  • ColorBlack
  • Cable Length11.80in / 300mm
  • Connector A1 x PCI Express 3.0 x16 Female 90-Degree Left Angled (to Add
  • Connector B1 x PCI Express 3.0 x16 Male (to M/B PCIe Slot)
  • Connector Number2
  • EMI shielded cable reduces signal interference
  • 300 mm length enables flexible vertical GPU mounting
  • 90-degree left angled connector fits tight chassis spaces
  • PCIe 3.0 x16 support maintains full bandwidth up to 16 GT/s
  • Lossless transmission verified beyond 200 mm extension

300 mm PCI-E 3.0 x16 riser for vertical GPU mounting

This 300 mm extender cable carries a PCI-Express 3.0 x16 signal from the motherboard slot to a graphics card. A 90-degree left-angled female connector on the card side allows clean routing inside cases designed for vertical mounting. The male connector plugs directly into the board without an adapter. Builders who need a longer reach or a right-angled orientation will need a different cable.

EMI shielding and rigid PCB keep the link stable

A flexible shielded ribbon reduces electromagnetic disturbance so the 3.0 link runs at full speed despite the 300 mm length. The supplier states lossless transmission is maintained beyond 200 mm. A rigid printed-circuit section and standoffs add mechanical strength at the connectors. No active components or external power are required, so the cable adds no audible noise or measurable power draw.

Mounting hardware included for bracket installation

The package supplies standoffs that secure the rigid PCB section to a universal vertical GPU bracket. This hardware simplifies alignment and prevents the card from sagging once installed. No driver, firmware or configuration software is bundled; the connection is purely passive and transparent to the operating system.

Highlights

  • EMI shielded cable reduces signal interference
  • 300 mm length enables flexible vertical GPU mounting
  • 90-degree left angled connector fits tight chassis spaces
  • PCIe 3.0 x16 support maintains full bandwidth up to 16 GT/s
  • Lossless transmission verified beyond 200 mm extension

Specifications

TypeInternal Power Cables
ColorBlack
Cable Length11.80in / 300mm
Connector A1 x PCI Express 3.0 x16 Female 90-Degree Left Angled (to Add-in PCIe Card)
Connector B1 x PCI Express 3.0 x16 Male (to M/B PCIe Slot)
Connector Number2

Questions about this item

How do I install the 300mm left-angled riser cable without stressing the 90-degree connector?

Insert the male PCIe 3.0 x16 end into the motherboard slot first, then align the female 90-degree left-angled connector with the graphics card, securing the rigid PCB standoffs before applying any pressure.

What maintenance does the EMI-shielded 300mm cable need over time?

Inspect the flexible shielding and rigid PCB standoffs every few months for dust buildup or physical strain; reseat both connectors if contact oxidation appears.

At what length does signal degradation become noticeable under sustained PCIe 3.0 x16 loads?

The manufacturer states lossless transmission beyond 200mm, so the 300mm cable is rated for full 3.0 speeds without degradation under continuous use.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.