We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue Cat6A UTP Ethernet cable 100 ft with booted RJ45 connectors

Wilfly

Wilfly Cat6A UTP network ethernet cable 100 ft Blue

SKU CH-H6EZ-12D66

A 100 ft Cat6A UTP cable with 24 AWG stranded copper, gold-plated RJ45 connectors and a 550 MHz rating for high-bandwidth PoE runs

  • Cat6A
  • Connector ARJ45
  • Connector BRJ45
  • Length100 ft.
  • ColorBlue
  • Cat6A rating delivers 550 MHz bandwidth for high-speed data
  • 100 ft length reaches distant devices without extra joiners
  • Gold-plated RJ45 contacts resist corrosion for reliable connections
  • 24 AWG pure copper conductors reduce signal loss over long runs
  • CM-rated PVC jacket meets fire-safety standards for in-wall use

100 ft Cat6A UTP cable

This 100 ft Cat6A UTP patch cable uses 24 AWG stranded pure copper conductors and gold-plated RJ45 connectors on both ends. It is built for gigabit LAN runs that demand a clean signal over long distances. The blue CM-rated PVC jacket meets UL and ETL verified TIA/EIA standards. It suits installers and home users who need a single, standards-compliant link.

Thermals noise and power draw

The unshielded twisted-pair design provides excellent heat dissipation for Power over Ethernet applications without active cooling. Passive operation means zero acoustic noise and no power draw from the cable itself. The 550 MHz bandwidth rating supports high-throughput data while the crosstalk suppression keeps the signal stable under load. This makes it reliable for continuous PoE-powered device deployments.

Booted connectors and CM jacket

Moulded boots on each RJ45 plug protect the latch from snapping during routing through tight pathways. The flexible CM-type PVC jacket bends easily around corners and through cable management channels without kinking. RoHS-compliant materials satisfy common building-code requirements for commercial and residential installs. The 100 ft length covers most room-to-room or patch-panel-to-wall-plate runs in a single piece.

Highlights

  • Cat6A rating delivers 550 MHz bandwidth for high-speed data
  • 100 ft length reaches distant devices without extra joiners
  • Gold-plated RJ45 contacts resist corrosion for reliable connections
  • 24 AWG pure copper conductors reduce signal loss over long runs
  • CM-rated PVC jacket meets fire-safety standards for in-wall use

Specifications

Cat6A
Connector ARJ45
Connector BRJ45
Length100 ft.
ColorBlue

Questions about this item

How do I install the 100 ft Cat6A UTP cable without damaging the RJ45 connectors?

Route the cable gently, avoid sharp bends tighter than the jacket allows, and press each RJ45 plug straight into the port until the tab clicks; forcing the boot at an angle can bend the gold-plated contacts.

What maintenance will the 24 AWG stranded copper conductors need over time?

Inspect the RJ45 contacts for dust or oxidation every few months; if corrosion appears, clean with a dry contact brush — no liquid cleaners — and replace the patch cable if the jacket shows cracking or the boot splits.

At what point does the 550 MHz bandwidth limit show up during sustained PoE use?

The 550 MHz rating supports the full Cat6A frequency range; heat dissipation is designed for continuous PoE loads, so the first practical limit is the 100 ft channel length rather than bandwidth saturation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.