Wiitek
Wiitek WSFP-H10GB-CU1M 1m 10GbE SFP+ DAC Twinax Cable White
A 1 metre passive SFP+ twinax cable carrying 10 Gbps over 30 AWG copper, compliant with SFF-8432 and rated for 0 to 70 °C
- Length3.28 ft.
- 10 Gbps throughput over a 1 m passive twinax link
- 30 AWG copper conductors keep crosstalk low
- SFP+ MSA and SFF-8432 compliant for broad switch support
- White PVC jacket simplifies cable identification in dense racks
- Operates reliably from 0 to 70 °C
Direct-Attach Cable for 10 GbE Links
This one-metre passive twinax cable carries 10 Gbps between two SFP+ ports. It is built for short-run connections inside a rack or between adjacent network devices. The 30 AWG conductors and PVC jacket meet SFP+ MSA and SFF-8432 compliance.
Suited for 10 GbE Switch-to-Server Runs
Installers linking a 10 GbE switch to a NAS, server NIC or router over a one-metre distance will find the length and white jacket convenient. Builders who need longer reaches, active optical cables or speeds above 10 Gbps should select a different cable type.
Passive 1-Metre Reach at 10 Gbps
The cable supports 10 Gbps over a single metre without external power. That fixed length and passive design are the decisive factors — if the link is longer or requires a higher data rate this assembly will not work.
Highlights
- 10 Gbps throughput over a 1 m passive twinax link
- 30 AWG copper conductors keep crosstalk low
- SFP+ MSA and SFF-8432 compliant for broad switch support
- White PVC jacket simplifies cable identification in dense racks
- Operates reliably from 0 to 70 °C
Specifications
| Brand | wiitek |
|---|---|
| Model | WSFP-H10GB-CU1M |
| Length | 3.28 ft. |
Questions about this item
Will this 1m SFP+ DAC work with my older 1GbE SFP+ switch ports?
The cable is passive twinax rated for 10Gbps and complies with SFP+ MSA and SFF-8432, so it will link at the highest speed both ends negotiate, including 1GbE on compatible ports.
How can I verify the link is running at 10Gbps after I plug it in?
Check the switch or NIC dashboard for a 10Gbps link status and confirm the SFP+ module EEPROM reports the Wiitek P/N SFP-H10GB-CU1M with 30AWG passive copper.
Does the package include any transceivers or mounting hardware, or must I buy them separately?
The cable has SFP+ connectors permanently integrated on both ends; no separate transceivers or mounting brackets are supplied or required.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114354BTC
In stock
