We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green SFP+ to SFP+ passive twinax cable, .5m length, PVC jacket

Wiitek

Wiitek Green 0.5m 10G SFP+ DAC Twinax Cable

SKU CH-E30S-G0S7T

A 0.5 m passive SFP+ twinax cable delivering 10 Gbps links between switches, routers, servers and NAS gear with 30 AWG conductors, green PVC jacket and 0–70 °C operating range

  • Length1.64 ft.
  • 10 Gbps throughput backed by SFP+ passive twinax design
  • 5 metre reach fits dense rack cabling
  • 30 AWG conductors keep signal loss low
  • 0 to 70 °C operating range suits data-centre heat
  • Green jacket colour speeds port identification

Passive 10G SFP+ DAC for short links

This green 0.5m twinax cable connects two SFP+ ports at up to 10Gbps. It suits switches, routers, NAS boxes and NICs that expose SFP+ cages. The passive design needs no external power and works with Cisco, Ubiquiti, Mikrotik and other major vendors.

Length and AWG set the reach

At 1.64ft the cable only spans adjacent rack units or neighbouring devices on a shelf. The 30AWG conductors limit the link to very short runs; longer distances need active optics or higher-gauge copper. Operating temperature is rated from 0 to 70°C.

SFP+ MSA and SFF-8432 compliance decide fit

The assembly meets SFP+ MSA and SFF-8432, so it will negotiate correctly in any compliant cage. If your gear requires a different coded EEPROM or an active cable, this part will not link.

Highlights

  • 10 Gbps throughput backed by SFP+ passive twinax design
  • 5 metre reach fits dense rack cabling
  • 30 AWG conductors keep signal loss low
  • 0 to 70 °C operating range suits data-centre heat
  • Green jacket colour speeds port identification

Specifications

Length1.64 ft.

Questions about this item

How do I pick the right length for my rack?

The cable is .5 metres (1.64 ft) long, suited for short intra-rack links between adjacent SFP+ ports.

What does 10 Gbps mean once the cable is plugged in?

It supports a 10 Gbps link between switches, routers, NAS or NICs with SFP+ ports, limited to the .5 m passive reach.

Which standard governs the SFP+ interface and what does it cap?

Compliant to SFP+ MSA and SFF-8432, the passive twinax caps usable distance at .5 metres while delivering 10 Gbps.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.